Search results

Have any of you tried this? I saw this on a recent episode of Graveyard Cars. The reviews seem to indicate that it works well, but not for very long. It would sure be nice to have a DIY treatment for bare steel parts to resist corrosion with something that doesn't involve paint. If you've...

https://www.facebook.com/marketplace/item/770344581713163/ Quoted from the post: "Low mileage Cleveland Motor 351 Cubic Inch from a 1973 Mustang.Car was rolled but engine was unhurt.Motor in storage last 30 plus years.Recently cleaned and inspected and Detailed.Cylinders and crank all look...

I have a fan shroud that has gray showing through the black finish. At first, I thought someone had painted it gray, but it turns out, the black is what has peeled/scratched off in areas. I blasted the inner surface to test the waters and it appears this is some sort of fiberglass. It's a...

This is a Scott Drake PN D1ZZ-16797-AR. I'm asking $50 and will ship for actual shipping cost. I somehow ended up with 2 LH hinges...if you have a RH, I may be interested in a trade. PM me here if interested.

Do any of you have or know where I can download old TRW specs? Looking for catalog data for L-2379F pistons that were commonly used in 351c. Conversely, if any of you know for certain that the Speed Pro numbers have remained unchanged in comparison to the old TRW numbers.

If this is legit, it appears to be in excellent condition and very reasonably priced. https://www.facebook.com/marketplace/item/223967414076480?rid=10225291901953348&ad_id&rt=1&refID=0&refType=0&referral_code=commerce_attachment

Got a message from member stevenpascuzzi saying that someone else has a china wall spacer available. This person joined on 1/12 and I get an error if I try to look at the associated profile. Beware if you get any messages from this user.

Looking for a pair of spacers that sit on top of the china wall at each end of intake manifold. This is for a 351 cleveland. AFD heads are slightly wider than OEM heads and push the intake up about 3/8". It's either going to need spacers or a really heavy bead of The Right Stuff. I prefer...

The windlace trim on the rear interior quarter panels are damaged and have become very stiff. Does anyone sell these? Are they fairly simple to make? Wonder what you folks have done for this detail.

Do any of you know where I can get a rebuild kit, or even if these were ever rebuildable? My 40 year old pump gave up on me last weekend before I could get my 71 ranchero's carb adjusted heha.

Looks like a good price on a pair or quarter panels. https://phoenix.craigslist.org/nph/pts/d/prescott-ford-mustang-quarter-panels/7685756989.html

Finally getting around to building up a pair of deluxe door panels and installing new weather strip. The weather strip is predrilled for 4 staples. The OEM panel has 6. Wanting to hear from folks who went with 4. Are 4 satisfactory? Do you wish you'd of drilled for 6? It looks like it...

What is the protocol for receiving and signing for a freight delivery? I've always heard to inspect before signing, but never actually done it. If the box looked good, I sign for it. I've called the selling company a couple of times asking them to explain their policy and didn't get, what I...

I've been looking for a suitable pattern for the film used on the deluxe interiors. The pattern ID and source that I had found (on this site) are no longer available. I ordered samples, and in one case, a roll of material, that looked good on the computer screen. Below is a picture comparing...

I'm looking for details on the 4V heads along with what differences exist between them and the SP4V version. From what I've found, thus far, they have raised intake ports. It seems the heads may extend farther inward than an OEM 4v head, raising the overall height of the intake by some amount...

I do some tuning tests on a short stretch of road and find myself pushing the limits of my brakes. I don't know what pads these are, but I'm sure they're not metallic or semi-metallic....certainly not ceramic. What material do you guys like for a good balance between performance and rotor...

I'm preparing to order a stroker kit and wanting to understand where I'll end up on static CR with iron vs aluminum. The default CR pistons that TMeyer sells are either flat tops or 20cc dish. With a zero deck and 64cc chambers, that comes out right at 10:1. I'd like to start with my iron...

I thought I saw that repop partial lower cowl panels were available for our cars? I did a quick search at a few places and came up short. Any of you know if they are available?

Looking for Crane Kit PN 99408-1 or similar (if something else exists). Please message me if you have one to sell or know of one for sale. Thank you!

I'm looking to add a rev limiter to a Durspark I and would be nice if it was also compatible with a Unilite electronic. So far, I'm seeing the MSD Soft Touch Rev Control and Pertronix 600 Digital Rev Limiter. Looking for feedback on an add-on rev limiter and in particular any feedback on...