Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 11/15/2020 in all areas

  1. I looked in the classifieds but did not see that one, thank you
    1 point
  2. I need a center dash bezel for an car with ac and the 3 gauges, do you have one? also headlight switch bezel and rear convertible side panels (white preferred) If you have any of these I am interested. Thanks Rich
    1 point
  3. 1 point
  4. David, Do you remember what you paid for your Maverick back then? I know what you mean about feeling old, I bought my '71 Mach in the spring of '72. It was a demo with 5,000 miles on it for $2,995. Still have it, now with about 40,000 miles on it. I did see a tee shirt a while back that seems to fit nicely regarding feeling a bit old. It stated, Inside this body is an 18 year old kid screaming, "What the hell happened". Mac
    1 point
  5. Dropped a bunch of parts off at the machine shop. My short block is assembled and he's waiting on parts for the heads. Those should be in this week and then it's assembly and finishing assembly of the engine. Had to notch my pan to clear one tube on the Hookers, they clear a stock core pan just fine, but mine is a fully fabricated unit.
    1 point
  6. paint, paint and more paint. I am getting closer to having entire car smoothed and ready for color.
    1 point
  7. I usually just read on this forum, but thought I would share recent results from my 393C build. Specs: Scat 3.85" crank bored .30" over SRP Pistons Isky roller cam: 218/228, LSA 112 Isky hydraulic roller lifters Trickflow 195 heads 72cc chambers, 1.55" springs Edlebrock Air Gap Intake Sanderson FC4 shorty headers Holley Street Avenger Ultra 770 - elec choke, vacuum secondaries DUI distributor 10.6:1 compression Peak torque was 499 ft lbs @ 4200 rpm. Peak HP was 501 hp @ 6300 rpm. 10 deg advance with vacuum. Not bad from a relatively mild cam. The engine will go back into a 71 Mach 1, with an FMX auto. Quick Performance Posi 3.5:1 gears, 31 spline axles I chose the parts based on what I learned here, and from posts/publications from George Pence, George Reid, 7173 Forum and others. Assembly and dyno was performed by Westside Performance in Houston. I'll try to post more pics and a video if I can trim it to the upload limit. FYI 393c dyno
    1 point
This leaderboard is set to New York/GMT-04:00
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...