Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 09/22/2021 in all areas

  1. No only a younger brother. I have been asked that question many time.
    1 point
  2. Thanks everybody! I ordered the springs, shocks and hardware from Eaton. Should be here in a couple weeks, and I think I am going to throw the sway bar in there too, I’m not going to be driving it real hard anytime soon and I plan on updating the front suspension this winter. Including the front sway bar with those upgrades.
    1 point
  3. Call Eaton for sure. I think from the pics your looking for +2. +3 would be to much in my opinion. You could always add a 1 inch shackles if you need more over +2. A 1 inch over stock shackle would still be safe. With your convection with Eaton you may want talk about the ride Hight as well to get look your after. KYB GR2 shocks are good value. I removed the springs and axle together. Installed the font of spring first. The wife and I rolled axle into place. Had the wife balance the axle while installed shackles the body.
    1 point
  4. Buying direct from Eaton is a little bit more expensive. I went that route anyway since I wanted to consult with someone at Eaton before actually buying them. Of course Eaton can custom make you a set, but they do stock the various OEM springs that came on our cars. As I recall I had three OEM options when I ordered; daily driver stock, competition suspension & BOSS 351. I chose the competition suspension springs as I did not really want the stiffness of the BOSS springs. I also opted for the all new hardware package they sell. It sure made installation easier and I'd recommend going that route. I suggest giving them a call and have a discussion. They are very knowledgeable and helpful. Should be a good first project for you and your son!
    1 point
This leaderboard is set to New York/GMT-04:00
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...