Jump to content

cheezeba11

VIP Members
  • Posts

    50
  • Joined

  • Last visited

Everything posted by cheezeba11

  1. Thanks. If you have one that would be great. PM me if you locate it. I wasn’t planning on selling, but would be glad to print one out for anyone who needs one. Chris
  2. Hi All, I'm looking to see if anyone could take a picture of their brake release handle or provide some measurements of the height and width.. or maybe could take a picture with a ruler under it for reference. Below is the billet one that is available.. not even sure if this is correct. I have the depth from what was left of my broken handle I'm looking to design and 3d print a replacement. Thanks Stay safe Chris
  3. I'm interested in the seat hinge covers... Let me know how much. Thanks
  4. Will check this week at the garage to see if I have any 71s. Here is the one I have for a 71. upload images Thanks sent you a PM
  5. Looking for a front seat belt in Black. PM me if you have one available. Thanks
  6. I'm looking for a seat back pivot bolt? (D1ZZ-6560392-A) PM me if you have one available. Thanks.
  7. I would also check the pitman arm as jpaz said earlier. Look for play between the pitman arm and center link
  8. This is what I'm looking for : Front Right mount was rusted out and back flange is also rusted out.
  9. Looking for a passenger side seat platform for 71 fastback. Please PM me if you have one available. Thanks Chris
  10. Thanks..I was pretty sure that they were not original. What I'm trying to figure out is if the small triangular piece in the picture was on original upholstery. Do you have a picture of the bottom of the backrest?
  11. Hi All, Received new seat covers from Distinctive Industries and wanted to confirm if the small corner sections on the seat back outside bottom corners should be sewn on the new covers. The picture below is from the existing seat upholstery. I contacted Distinctive and they are going to research, but figured someone on here must have an original and can confirm. My concern is that the side is going to start working up and the seat frame will start to show. Plus it just doesn't look finished but maybe that's how they came from the factory. I don't think the covers I'm replacing were original. Thanks Chris image upload
  12. Just though I would check before I purchase new covers for the front seats. I'm looking for what I think is a Distinctive Industries Black/Black Mach 1 seat back cover (just one back cover). Is there is anyway to tell Distinctive vs TMI vs OEM? I have a rip in one and have gotten a few estimates to repair that are almost the cost of new ones. Also looking for the Mach 1 seat buttons as well. I'm assuming these were recovered years ago since they did not have the seat button. The passenger and driver seat bottom are still in good shape. These were installed over the original foam as well and wondering if it is worth replacing everything. Thanks Chris
  13. Very close! Tell us more about this QSI Camera you speak of! Astronomy or Microscopic Camera or other field that needs high sensitivity, and also way too expensive for me !
  14. QSI Camera - takes very very good pictures..Astronomy Camera
  15. I first went with original color LED's with the Blue Lens and it was marginal at best. I switched to a set of Green LED's and removing the covers. I bought a set of 20 green LED T10 bulbs online for < $10. The pictures below were taken during the day outside.
  16. Same here.. except I ordered 5 for me and went back an put a second order in for 5 for a friend of mine. They changed each order to only 1.. so I'm getting 2. Lesson learned.. place separate orders on any really good deals! I had a similar instance a few years ago where they had an H&S Auto Hot Shot Stud Welder marked at $100 bucks. I bought 3 of them, kept one and flipped the other 2 on ebay for over $300 each. ::thumb::
  17. Hope all goes as planned...looks nice! Since the Boss 351 post looked like a scam...below is the eBay motors security page that details some of the tactics scammers are using on eBay. https://pages.motors.ebay.com/buy/security/index.html
  18. Hi all. I'm looking for a seat track. I'm looking to repair one of my existing tracks that is missing one of the clips that holds the bearings. Any condition as long as the clips/bearings are still there/usable. PM me if you have one available. Thanks Chris
  19. If you make a tracing and add a grid I can take that and make a full size PDF that can be printed on a standard printer, taped together, and cutout. The grid can be any size...just square and consistent Maybe trace with a sharpie and the grid with a fine pen. Then take a photo as centered as possible. Chris
  20. Hi All, Hopefully simple questions. Just wrapped up painting my Mach 1 and now turning to the interior. The metal trim panel under the rear window on a fastback is held by rivets in the front, does anything hold it down in the back under the window? Also, was there any factory insulation / sound proofing installed behind the panel (visible in trunk). Thanks for any guidance. Chris
  21. Clearing out - going to be trashed/scrapped unless someone needs them. Smaller parts pay for shipping only.. larger parts local pickup only. PM me. 1971 front drum brake parts - backing plates, brake hardware, drums, hubs 351C heads - d4ae - need complete rebuild Left and Right convertible windows Left and Right Fastback quarter window mounting brackets
×
×
  • Create New...