Jump to content

John J

VIP Members
  • Posts

    1,406
  • Joined

  • Last visited

  • Days Won

    4

Everything posted by John J

  1. I didn't have any problem dealing with them. But it does say on their web site that they are having Covid delays. Must be short of staff. John J
  2. Not sure what state you are in but NPD sell the breaker and so do other vendors. https://www.npdlink.com/product/circuit-breaker-20-amp/102057/200332?year=1973 If you still need a photo of the location let me know and I well take one. I have a 73 vert John J
  3. Here where I bought mine from in case you cant find the right material to custom make them. They make stripe kits for 71/73 cars and a lot more. https://www.graphic-express.com/ford-motor-co/1964-78-mustang-restoration.html John J
  4. I am replacing the tank and pump. The hoses are dry rotted so I and replacing them too. I know you need some slack so you can open the hood. Not sure about the routing. The hose is just laying all over the place right now and I want to clean it up. Any one got a photo or is there a drawing somewhere? John J
  5. Here what I used. I took the cover of the repo regulator and put it on the Motorcraft electronic regulator. NPD sell them. Here is the link. https://www.npdlink.com/product/voltage-regulator-alternator/100810/200432?year=1973
  6. Sorry to hear about your accident. Burns are never fun to deal with. Get well quick. I have heard good things about that hospital. Since that the hospital is in Detroit they have some of the best ER doctors around. They have seen it all! John J
  7. What kind of clip did you use? I bought a set and they don't seen to want to stay on very well. John J
  8. Looks great. Good luck with the rebuild. John J
  9. I just had my Global West sub frame connectors put in. It made a big improvement on how the car handled. Even more than I thought. No more flexing.
  10. I live in Michigan and the NPD is 30 minutes from my house. I bought a ton of parts from them without any issues. I have had few items that I did not end up needing and they took them back with no problem. John J
  11. I am game for a meet up. As long as I am in town. Let me know what the plan is. John J
  12. It all one piece. It is easy to replace the unit. Their a screw in bottom of the bezel that you will have to remove first NPD usually has them but they are out of stock. You should be able to find one on on eBay or CJs. https://www.npdlink.com/product/switch-assy-power-window-lh/213491?backurl=search%2Fproducts%3Fsearch_terms%3Dpower%2Bwindow%2Bswitch%26top_parent%3D200001%26year%3D
  13. What the best thing to use to hold on the door water shield. The PO use duct tape and it dried out. John J
  14. Someone paid a million dollars for the first one made. 2021 Ford Bronco First Edition, VIN 001, Auctioned for More Than $1 Million (yahoo.com)
  15. Someone paid a million dollars for the first one made. https://www.yahoo.com/autos/2021-ford-bronco-first-edition-174600615.htm
  16. The first shot was no big deal. My arm was sore for the day. The second shot was no big deal for the first 10 hours then hit me hard. I had the chills and very tired. I tool a sick day the next day and 24 hours later I was fine again. I never had a delayed reaction like that before. I got the moderna vaccine. No complaints I am very happy to be vaccinated. John J
  17. Here is the video. I never heard the end of the story on who owned the car during that time. https://www.facebook.com/1487420871527473/videos/1009196422883928
  18. I just bought some Global West sub frame connectors' for my 73 convertible. I am not a welder and am going to have a shop install them. What would be an average cost to have them installed. I am in Michigan. John J
  19. Nice car and a very lucky kid. 'John J
  20. I just received it in the mail. I have not had a chance to see if their anything new available. John J
×
×
  • Create New...