Jump to content


Site Supporters
  • Posts

  • Joined

  • Last visited

About oskar_mach1

Vehicle Info

  • My Car
    71 Mach1 Cleveland 2V


  • Location
  • Region
    Not Selected

Personal Information

  • Sex

oskar_mach1's Achievements


Enthusiast (6/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges



  1. Just did the site supporter, it's worth every cent. Oskar
  2. Hi Jürgen, I just live around your corner ( Niederdorfelden ) funny isn't it? I have an 71 Mach1 in the same colour, well I think we need to met us, so we can talk and figure out what we can do for each other. My cell # 0176 4800 8862 Greez, Oskar
  3. But the guys from this club where always against our big bodys, I actually left this club for this reason.
  4. Hi all, here in Germany we have an special rate for so called, historic cars. The car must be 30 years or older and need to be inspected by our technical inspection departement. After they decide it is worth preserving and it is in good technical and close to original condition, you get a special licence plate with an H, like historic, at the end. After this inspection you have only to pay about 140$ a year. Oskar
  5. My car was sitting in the garage for about seven years and starts right away with the old gas.
  6. Do you have a link to this video? I also have to install it.
  7. Thats exactly what mine do, it is sitting higher on one side ( left ), what did you do to solve it?
  8. Hi @ all, I bought a new shifter bezel from OMS but it doesn't fit in my full size console. Is there any different between the consoles?
  9. I pre-thread them and it works pretty good out, I also threaded the holes to prevent that they are breaking. This are now the first metric things in my car ;-)
  10. Thanks Ray and Dough, I know Lowes, but we do not have it here in Europe and I don't think our hardware store has this kind of nuts. May someone used a different way? Thanks, Oskar
  11. My favourite is grabber blue with argent stripes, it is not only I have this combination,I just like it most on our cars.
  12. Hello Guys, As mentioned in the description I have a question about the dash trim panel. Recently I bought a complete set from OMS and now it was the time to install it, but I figured out that the self tapping nuts behind the passenger side panel will not fit, they are way to big in diameter. Is there are somebody who had the same problem and may found a solution? Thanks, Oskar
  13. Thanks Mike, But I'm looking more for the dimensions, I get all of the belts here in Germany but need the dimensions of it. I don't want to disamble the belts just for measurements. Thanks, Oskar
  • Create New...