Jump to content


VIP Members
  • Posts

  • Joined

  • Last visited

Everything posted by fangstang

  1. Anyone have a full set of vinyl roof trims available and willing to ship to Australia ? I’m really only after the drivers side ( still LHD ) Z shaped mould that goes from the lower area to the roof behind the 1/4 window but will take a complete kit if available. hopefully complete with clips , thank you
  2. Because I’m sending my my rear bumper away to be rechromed I thought might as well do the front also , did not find any stamps like the rear but found these raised letters and numbers ? Are they original also anyone know what they mean ?
  3. Yes mine is a early 72 and going by my marti report September is correct Mine is 100% original then as mine does not have the crazy gap the aftermarket gives you , wow makes you wonder how they can sell Them
  4. Can someone tell me if my rear bar is genuine going by these numbers ? , my painter has scratched my bar and I’m looking at either rechroming or replacing with a aftermarket but obviously if mine is aftermarket I’m not going to spend the extra coin rechroming I’ll just replace with another aftermarket one . has anyone used the aftermarket front and rear bars before are they any good do they fit well ? Does the chrome hold up ?
  5. Biggest issue I found when putting my roof back on was the clips as they are not reproduced make sure you get them with the trims , I tried using ones from a 71 to 73 cougar as they are reproduced but they are different .
  6. Can I please have some help please I had a new vinyl roof fitted to my grande the trimmer used the factory measurements out of the book to position the stitch join and I’m worried something is wrong because under the trim at the rear there looks to be a factory formed gap under the trim for it to line up with ? I just want to see if this is correct or not , can I please get a photo of the area in the photo so I can see the vinyl raised area with the joint stitch under the trim , thank you
  7. Hi my mustang is in going it’s hood lining replaced it’s been in the painters for around 6 months just wanted to let my trimmer know how the lining is held in position , only thing now sure on is above the doors does the lining go under the trim that holds the rubber ? Pics would be great if anyone has any
  8. Can I please get some help im doing some work on my 1972 Grande coupe and just need to know the correct location / measurements of the posts on the bottom of the back window so that I can mount my trims with out issue after , I only want measurements from a coupe not a fast back , photos would be great also , thank you in advance Sent from my iPhone using Tapatalk
  9. I’m running the FAST EFI 1.0 in my 1972 Grande very happy with the performance and throttle response of this unit , 100% not going back to carby ever should of done it years ago , I also used the tanks inc internal fuel pump in my tank highly recommend their products Sent from my iPhone using Tapatalk
  10. Where can I get that 4 leg mount from ? Sent from my iPhone using Tapatalk
  11. Is the length of the tail shaft you gave me correct ? I mean could I make one up ready from the measurements you gave me ? I already have a yoke to suit the C4 and and everything else like flex plate and torque converter Sent from my iPhone using Tapatalk
  12. Hi guys can any one help me I’m going to swap my FMX out for a C4 in my 1972 Grande , my question is I’m wanting to either buy a genuine transmission mount to suit my C4 or see a Picture of the difference between a C4 and a FMX Mount so I can work out how to modify my existing mount to fit the C4 , also any other info you guys have on what modifications are needed to do the swap out obviously I know I’ll need to make another tail shaft and fabricate some new cooler lines , but from what I’m told the T bar from my FMX will bolt straight up to the C4 Sent from my iPhone using Tapatalk
  13. I got a new set from Dashesdirect ( sold through California Mustang )in the Ginger for my 1972 Grande just a month ago and it was no where near Ginger I’d call it a cappuccino colour in no way Ginger , the quality of the mould is fine so I guess if you got the black from them you would be happy or maybe the white but give the Ginger a miss they should not be advertising as a Ginger it’s false advertising , I’m also interested in a good supplier of the Ginger colour if anyone knows 100% of the colour match ? . I got my money back and also got to keep the trims but this colour is so dam ugly lol
  14. 1972 Grande 351 Clevo Sent from my iPhone using Tapatalk
  15. 1972 H code Grande Sent from my iPhone using Tapatalk
  16. Mine were under the carpet on both drivers and passenger sides , passenger was in good shape drivers side was looking a bit sad on the bottom half
  17. Need them in oz also mate , great job !!!! , how much ?
  18. Knowing my luck it's already sold !!!!
  19. Thanks mate , just looking around now for the panel so I can have it imported to the land down under , really keen
  20. Mustang Ricky do you have any pics of the inside of the boot during and after mod , I'm buying a panel and doing the mod any other tips you can give mate?
  21. I'm looking at doing the same mod with the tail lights is there any reason you used the 68 tail light panel over the 67 panel was it a better fit? I'm looking at using a 67 panel instead of 68 as I'm not a fan of the chrome grill on the 68 lights can the chrome grill be left off or does it look unfinished?
  22. Need pics mate to help you properly ,always happy to see another 71-73 being restored
  • Create New...