Jump to content

Pastorpat

Members
  • Posts

    143
  • Joined

  • Last visited

  • Days Won

    2

Pastorpat last won the day on December 4 2017

Pastorpat had the most liked content!

Vehicle Info

  • My Car
    1971 mustang convertible.

Location

  • Location
    Texarkana Texas
  • Region
    South

Personal Information

  • Sex
    Male

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Pastorpat's Achievements

Collaborator

Collaborator (7/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

16

Reputation

  1. $18,000 In it’s a 1971 Mustang that was originally a 6 cly 3 speed manual car white with black interior and top. So it is not matching numbers but engine in the car was from a 1971 mustang. My plan was to build a Mach one convertible tribute car. The original engine was not with the car when I purchased it. It had a rebuilt 6 cly. It has had the following work. Engine A 1971 Mustang 351 2v head cleveland engine was built with flat top pistons 40 thousands over. New bearings, camshaft, Pistons, valve springs, double roller timing, chain, camshaft is designed for torque. Edelbrock 4 bbl intake, holley carburetor, hooker headers, 2 ½ exhaust, chrome tips. Runs great! Estimated HP 330 with over 400 foot pounds torque PerTronix Ignitor III[emoji2400] Solid-State Ignition, and coil New radiator, new alternator, Rebuilt power steering pump. New water pump New starter New stainless steel brake lines, New brake hoses, new power brake booster, new rotors, new master, new pads, new calpers, new rear brakes, shoes, wheel cly, hose, new stainless steel E brake cables . So the brakes are all new. Transmission is a used worldclass 5 speed from a late model cobra. New flywheel, pressure plate and clutch throw out bearing. McLeod New driveshaft A 9 inch mustang rears was purchased and rebuilt, factory posi new clutches. 3.71 ford gears, all new bearings. Has new rear grab a track 5 leaf springs. Front springs are heavy duty springs and roller perches. So drivetrain and brakes are done! The car had rust, following items replaced Floors, rear tail light area, under cowl a patch panel was placed, new quarters, battery tray, and some of the wheel wells. Also subframe connector was welded in. Car was epoxy primered and blocked. Painted 1971 poly blue with ardent silver. New weather striping. New grill for Mach one. And sport lights New tires. 16 inch cragar s/s in front and 17 inch cragar SS in rear. I have the factory 14 rims and hubcaps. New front and rear bumper. What the car needs. Interior is original. So it is tired. Dash needs final assembly. Was updating it with a/c. Has factory a/c under dash. I also have Mach one gauges. But not the wiring harness. Top is tired. It had some rips. They have been glued. Rear window was reglued.it was patched so that if I was caught in the rain it would be ok. I have all new weather striping for top but not installed, frame for top could use paint. Top does have new hydraulic hoses. And it works. The suspension could use new shocks, and rubber parts in front. Windows need adjusting. For the a/c it needs most of the under hood parts, such as brackets, compressor, and condenser, and hoses. I have driven the car and it goes and stops well. The shifter is the original one from the late model mustang. They make a hurst shifter that would be nice. It’s a little longer by a few inches. For the bad news. The other day. The rear driver wheel came off and did some damage to driver quarter. I think most of it will come out without repainting quarter. I should have re torqued the mags. Dumb thing to do. I was going slow. Like 10 or 15 when it happed. Car just sat down on the wheel. Sent from my iPad using Tapatalk
  2. Sent from my iPad using Tapatalk Sent from my iPad using Tapatalk
  3. I installed it with headers and heartthrob 2.5 inch exhaust. Cadillac tips. Sent from my iPad using Tapatalk
  4. I have a t-5 and trying to decide which hurst shifter to use. Sent from my iPad using Tapatalk
×
×
  • Create New...