Jump to content

RacerX

VIP Members
  • Posts

    810
  • Joined

  • Last visited

  • Days Won

    2

Posts posted by RacerX

  1. 47 minutes ago, 71fast said:

    I don't know how much to ship to 77836.  I assure you I would ship the least expensive way possible from 99336.  I paid $50.00 shipping & handling for Eaton to ship them to me.

     

    Ok, I figure UPS ground should be $20-$30. I'll take them with the shocks. My car is a convertible, so it should squat a bit more.

    Let me know how you want paid.

  2. 32 minutes ago, Lancelot72 said:

    I have two body panels up for sale.

    Re-pop front passenger fender was bent in shipping, (four inches of the top back corner are bent at a 90deg angle and the front corner from the bottom of the wheel well to the upper front corner are creased badly. Maybe the rest of the sheet metal is the portion you need?

    Re-pop rear lower qtr panel not bent at all, just a few surface scratches in the primer coat. 

    I can send pics if requested.  

    I don't need these, and I need the space they are taking up.  I'm in San Antonio, TX and would prefer not to have to ship them anywhere.  Let me know if you are interested.  Make me an offer... Please

    Lance at 314-496-6651

    Lance,

    Can you send me pictures? and what you want for them? I'm in College Station area.

    Curtis

    c d e s a u l o s   at  gmail   dot   com

    remove spaces for email above

  3. 1 hour ago, Big Red Mach 1 said:

    To my understanding, if your front windows were power, the back ones could roll down manual. If the front ones were manual, the back ones were fixed. Not sure what the logic was behind that. 

     

    All 4 windows in my car are power and I've seen other Mustangs with power having the same, all 4 roll down powered.

    I've never seen the configuration you speak of and I've been in this hobby 39 years.

    • Like 2
  4. 55 minutes ago, Big Red Mach 1 said:

    Mach 1's didn't come with roll down windows. So I have the glass, but I need everything else to make them work. 

    My '73 Q code Mach has power windows and the rear ones roll down. Great to have when the weather is nice and just cruising in the car enjoying the exhaust sounds. 

    • Like 2
  5. 12 hours ago, Carolina_Mountain_Mustangs said:

    The filler panel between rear window and trunk is very common place for rust. Since the cars were not dipped there is nothing inside the panel to stop rust. Also if they sealer was not applied perfect just a pin hole lets water in from the rain gutter there. I have a California car and that was only place that had rust. I cleaned it up and brushed on some POR and new seam sealer. I had a parts car from Michigan that had zero rust in that panel that I used on another build.

     

    I wouldn't use that por crap on my worst enemy's car. Do it right or not at all. 

  6. 1 hour ago, cwalker509 said:

    I am thinking that may be one of only a handful of sheet metal parts not rusted thru. When I can lower the lift I will take some pics and sho you what it is like there

    Ok, thanks. That's the weirdest part rusted on this car. The cowl is also rusted but that's from pine needles that weren't removed. I've been searching for this panel for a while.

  7. 39 minutes ago, kulfurs said:

     I have a complete rear bumper for a 73 mustang ( I replaced with a 71 ) that is in good condition.  I am offering this to anyone free you just have to pay the shipping cost. It weighs 20 lbs with the shipping box. If you are interested my zip is 70006 so you can figure out shipping cost. Thanks

    69C83CE3-C81F-46D3-A1E2-CDED1A914F0C_1_201_a.jpeg

    I'd like it. Checking on shipping options now.

  8. 5 hours ago, Heardatbeat said:

    Good evening ya'll. I got some 351C parts for sale. Take a look at the album and see if anything interests you. I got valve covers, harmonic balancer, flywheel,  Carter fuel pump, radiator fan, radiator, dual port distributor vacuum, entire Z bar linkage from my '71 Mach 1, black bucket seats. Anything of interest let me know, I'm on the hunt for some standard size forged pistons, valves, anything to rebuild my 351C. 

    Parts for sale https://imgur.com/gallery/7tvFNJB

    Whats the pn# on the harmonic balancer?  Is it for a HO/CJ?

  9. 1 minute ago, Cyscyclone said:

    Very nice tilt colum, black has new ignition switch and new ignition lock cylinder with 2 new keys. Comes with the lock out rod for automatic. 

    Bucket seats and rear non fold down seat in white need recovering

    Front Valance

    Front fender extensions

    Rear Quarter extensions

    Rubber rear bumper fillers

    Black center console with clock

    Headlight buckets and rings 

    Mach1 hood (twist locks are gone)

    Located in Kelowna B.C Canada. 

    It'd really help if you identify the years applicable for the parts and your asking prices. For example, the tilt column have different ignition switches. Also the headlight buckets are different on 71-72 and 73's

×
×
  • Create New...