Jump to content

Copestang

Members
  • Posts

    129
  • Joined

  • Last visited

Everything posted by Copestang

  1. can you tell me which one is right for disc/ drum power brake setup, if neither can you show the right diagram
  2. ok thanks, so i install the gear washer and snap ring first and the snap is going lock them down? is there a specific way if’s give in. i’ve this order a snap ring from ebay
  3. was changing my ignition lock and a gear and washer came out , not sure how to put it back in, also i don’t see a snap ring that a diagram show
  4. no part number is on the rag joint, i got it off ebay
  5. yes, i’m going take off to put pittman arm, i’ll get the part number then
  6. You are right there is no New wiper motor, not sure what i did, it was about 3 years ago, but i know i did change something that got to do with the wipers. i’m going try what you have posted, thanks
  7. when i turn the wiper off they stop in the up position how do i change this, it’s is a new wiper motor
  8. when i turn the wiper off they stop in the up position how do i change this, it’s is a new wiper motor
  9. thanks for the pictures, got it working
  10. brought a original trunk light, is it’s installed correctly and how do a Mercury switch work?
  11. 73 mustang wiring harness non-ac only one wire was cut, rear defrost wire and speedometer cable
  12. i did spread it out a little and it fit, not sure what i’m going to do about column end 🤔
  13. so all i need is a coupler to fit the gear box shaft cause the column end should fit
  14. this is the difference that i have noticed, other than that i agreed with you why there need to be a different at the bottom
  15. the tile column didn’t come with one to rebuild
×
×
  • Create New...