Jump to content

Ballaratcastle

Members
  • Posts

    160
  • Joined

  • Last visited

Everything posted by Ballaratcastle

  1. Hi eveyone. Thanks for the replies. Sorry I was away over the weekend and didnt get an email notification. I fitted a new horn (CJ Pony) and also fitted a new steering wheel when I assembled the car. Had no steering wheel parts left over so I will have to get an auto electrician to investige those as a possible cause or a short but it seemed co-incidental the horn works fine for days it is only when I put the headlights on it blows. Cheers
  2. Hi Team.. Ever since completing my 73 build with original wiring my horn fuse kept blowing. Haven't worried about it until our Warrant of fitness check every 6 months where I replace it for the check. Horn goes fine until I discovered it only blows when I turn my headlights on. I know from the wiring diagram it is linked to the cigarette lighter and wondered if it has anything to do with the bulb that is on inside the cigarette lighter which is definately going when lights are on. Is there anything I can easily check k without pulling the dash. Cheers Steve NZ
  3. Thanks guys I am still trying to work things out without knowing what the actual drive gear teeth number is. The trans guy who rebuilt my C4 thought it was an 8 tooth from a guess but the links you have given me tend to say for gear ratios up to 3.5 they are 7 tooth gears. As mine is a 3.25 (links say 3.27??) (Crown wheel 39 teeth and Pinion 12) I did count the speedo gear tooth which is an 18 so am trying to work backwards with the indicated speed of 75mph being 62mph actual. The tyres are 26.6inch so 758 revolutions per mile.
  4. Hi team I have a 73 vert with a 351W and C4 transmission. Put the car together and discovered that the speedo is reading 75mph when I am doing 100km (62mph) using a gps speed app on my phone. I discovered when adding an LSD to the 9 inch diff that the gearing wasnt the 2.79 as on the tag but 3.25 and my rims that came with the car are non standard 16 inch mercury grand marquis wheels. The tyres on them are 225/60/16s. I have no idea which speedo driven gear is on the cable and am not sure which size I should get to bring the indicated speed down to reflect the real speed as my mileage is obviously going up quicker than necessary. Is there a formula from wheel size and diff ratio to get the correct speedo driven gear? Cheers Steve
  5. Thanks I only got them powder coated as an interim measure until I could afford some better ones. They were just bare alloy when I got them and I didn't like the look. I have had some positive comments on them at car gatherings but I still think the original magnum 500 rims either steel or alloy still suit the muzzys
  6. Yes that's why I wanted to see some on a car first as I had my doubts too. I powder coated black the rims my car came with as I didn't have any $$ left to buy new rims. I discovered they were mercury grand marquis r16 inch rims
  7. Had no reply from anyone on our forum however I did get a reply from a fellow Mustang owner of a 71-73 face bookk group. He sent some photos of these rims on his red convertible for anyone who might be interested in seeing what they look like as well.
  8. So I removed my carrier/diff head and the oil was quite black and smelled burnt. I had sucked out the old oil and put new oil in just over a year ago. My mechanic didnt have the chance to disassemble the diff head until yesterday. Turns out the ratio is 3.25 so this proves the diff is not original in the car as the code said 2.79 ratio. I am happy to stick with the 3.25 as she is 99.9% a street car and glad she has a little bit better acceleration for that once a year on the 1/4 mile. I am replacing all the bearings, collapsable spacer, seal and o-ring. Question are they always a square profile shape o-ring? Will a round profile one do if I cant source a square profile?
  9. Thanks. I definately dont have the staggered shocks as I removed the carrier the day before yesterday and dropped it to my mechanics workshop to pull apart. He will check my gear ratio. So did all 71-73 with a trac loc 9 inch have the staggered shocks? I see they were added to an earlier model which looks a bit different. I dont have those skills to do that unfortunately so it would cost me more $$$ than I have right now to mod it... was way over budget getting it back on the road! Lol
  10. Ha exactly. I bought the car already painted black. The previous owner in the US bought it around 2013 and it was blue with blue interior. He got it panel and painted and then it sat as a body shell for 5 yrs before he sold it. He did have 11 cars in various states of rebuild. I am undecided whether to change the seat colour to dark red. A lot of people who have seen it like the white and with the roof down the seats dont get hot. Thanks Stanglover. Yes I did add a leaf to the old springs as the cost of importing springs from the US paying for the weight was beyond my budget! When I got the car assembled and took it to my first car gathering, with passengers in the back the diff hit the drivers side exhaust pipe over gentle bumps. The extra leaf and bend in the springs lifted her an inch as she was a bum down stance before. I have attached a photo from that car show where she is looking like a drag car with the nose up! I am dropping the carrier out tomorrow when I can access the car. I will disconnect the drive shaft while the car is on the hoist and I presume if I rotate the wheel one complete circle I can count the revolutions on the front of the diff to estimate the ratio? looks nice in "All Black" very appropriate for a NZ car don't you think! NPD (National Parts Depot) sell Eaton 1" longer shackles to raise the back end to a more desirable stance. They are like 20 buck each, you need two of course. I'm getting a pair for my car as perhaps you had read a past post of mine talking about the GTA's being too arched and I needed to use 1" lowering blocks. Well I took the springs to a local spring shop to get de-arched 1", but the guy gave the job to a worker who took them down 1 3/4". They didn't want to re-arch them if case they cracked, so until I can buy Eaton springs, I'm stuck for now, but the longer shackles will bring it back to where I want it.
  11. Ok thanks Don will do. I will get back to everyone tomorrow after I remove it and let you know.
  12. Thanks for the photos. I will chuck the car up on the hoist tomorrow and take some photos from the same angle as yours. I only have a couple of shots at the moment to show the diff. There are welding lines showing where the diff was added to the axle tubes. Are these normal. Also one of the rebuilt LSD I am putting in.
  13. Thanks Stanglover. Yes I did add a leaf to the old springs as the cost of importing springs from the US paying for the weight was beyond my budget! When I got the car assembled and took it to my first car gathering, with passengers in the back the diff hit the drivers side exhaust pipe over gentle bumps. The extra leaf and bend in the springs lifted her an inch as she was a bum down stance before. I have attached a photo from that car show where she is looking like a drag car with the nose up! I am dropping the carrier out tomorrow when I can access the car. I will disconnect the drive shaft while the car is on the hoist and I presume if I rotate the wheel one complete circle I can count the revolutions on the front of the diff to estimate the ratio?
  14. Thanks. My car is in storage at a friends factory during lockdown so I havent been able to access it until tomorrow. I will have a look and check. As I assembled the car over a year ago I cant remember but think both the shocks went the same way into the floor behind the seat where I did the nuts up from memory. Because the car had the extra plates and a 9 inch made me wonder if the diff had been swapped. I googled what they are there for and saw photos showing a rear sway bar but my chassis doesnt have the holes where the sway bar rubber bush mounts would be so one has never been fitted. Friends have some old rims with semi slicks to borrow for the 1/4 mile so wont be running on the old tyres.
  15. Hi Team My 73 vert was originally a 302 coded car with a C4 and Axle 3 2.79:1 ratio The car when I bought it and imported it to NZ just over 2 years ago had a 351W C4 and what I believe to be a 28 spline 9inch diff. The previous US owner purchased the car 6 years earlier with this engine in it. When replacing the shocks, I also noticed the spring hangers had extra plates with an extra tounge and hole fitted which I believe are for a rear sway bar assembly. I am about to remove the Diff carrier assembly as my mechanic is going to fit a 2nd hand rebuilt 28 spline LSD that I bought as she is a single spinner. My question is I was wondering if I should change the crown wheel and increase the ratio. I had noticed that the speedo is not accurate. Using a phone speed app 100km (62mph) is showing as 75mph on the speedo. I wonder if the 9 inch is original or swapped out as some feedback is a 302 car would not normally be fitted with a 9 inch. I cant recall the tyre size but she is also on 16inch rims and 215 tyres (cant remember ratio). I doubt the speedo head on the cable was changed if the diff was changed when the 351 went in. Would this error in speed be tyre circumference only or have I actualy got a different ratio diff than on the tag? I will be taking the car down the 1/4 mile again hopefully in Sept again (if group events allowed) at our Fathers day drags hence why I am putting in the LSD. I had traction issues with standard tyres and best ET was a 15.2 at 94mph I am happy for it to remain a cruiser for mustang club runs and local car shows so dont need an accelerating monster as the engine HP is a modest 400 only so she isnt going to break any 1/4 mile records but a 14 and 100mph over the line would be nice!
  16. 1973 Was originally blue with a blue interior. White roof. Had 302 according to the codes. Last American Owner had it repainted Black. Had a 351 windsor transplanted into it some time in its life. He wanted to stick a 460 stroked to a 545 in it with kaase P51 heads. Was offering it for sale with either the 351 or the 460 block bored out and had stroker kit, not assembled. no heads or fruit so I opted for the 351 as compliance would be difficult in NZ. 351 now rebuilt 30 thou over. 400Hp. Edelbrock E street heads, performer cam intake and 600cfm carby.
  17. Hi team. Has anyone put the all black version of the magnum 500 rims called the Stealth on their car. My 73 vert is black and blacked out chrome so interested what they may look like. My current wheels are 16" mercury grand marquis rims that came with the car but I got powder coated black
  18. Hi mate Yes I had them powdercoated black. I have some on my beach hop post but have added one here now Im home from Holiday. batman dark knight rises police
  19. Mate your a legend! You obviously took the time out of your day to do an eBay search for me .I really appreciate it. I have clicked the ol buy now as that's the best price I've seen, only $22 in nzd my currency .I am having it sent to a California address of the kiwi who shipped my car to me. Will be a delay of a couple of months but he will send it over free by chucking it in a container of bikes and cars he send every few weeks . Cheers. The rest of the Mustang bits I need I'll just get online delivered to him as well .the wife did the trip bookings .I didn't do my homework very well!
  20. Thanks so much. We ended up arriving in Houston late and I've just discovered John's Mustang parts is closed tomorrow so there goes the opportunity of picking up some bits and pieces before our annual All Ford Day in Auckland.! IllI'check ifany dealers parts departments are open tomorrow but I'm sure it will only be the salesmen on if they are. There is a website in the USA selling just centre caps for around $30 USD but yes the freight does kill it. I eventually want to change the rims for the magnum 500 stealths in 12mths or so when I've paid more of the car loan off so didn't want to spend half the price of a new alloy wheel just for a centre cap that I'm going to paint black!
  21. Greetings team. Have just arrived back to Miami from a cruise (needed a break after spending a year building the muzzy!) We are staying tonight in Houston and are flying out 9pm back to NZ Sunday so I have some time to pick up a few little parts I need for the 73 from John's Mustang parts but he doesn't carry half of what I need .anyway what I am also trying to find is a second hand centre cap for a 16" crown Vic/mercury grand marquis which are the wheels on my car. Do any members in Houston know of a wrecked/second hand parts place that I can contact when I arrive in Houston this afternoon please. I have a photo of the cap on a previous thread when I was trying to identify it as the photo on my phone is too large to post and I can't downsize it. Thanks
  22. Ha no we definitely drive on the left. One view was a selfie taken by my daughter so probably reverses the photo
  23. Well team thanks to all the helpful advice (and parts) from you all here on the forum, I finally got the old girl back together and made the start line at beach hop. Dont want to bore you all with heaps of photos so have just thrown in a few. My daughters were excited to join me on one of the runs where we head in convoy (400+ classic/muscle cars/hotrods) and park up in 3 different locations over 3 days. Was an awesome experience especially after attending 5 years without a car and finally joining the parades instead of watching them.
×
×
  • Create New...