Jump to content

73FastBk

Members
  • Posts

    68
  • Joined

  • Last visited

  • Days Won

    1

Everything posted by 73FastBk

  1. Im in Houston tx but have a friend out there in Nashville
  2. Is there a place online I can order the paint for my 73 mustang. It’s medium copper but just need to repaint the front bumper. Thanks in advance!
  3. Thank you for tip! That’s good to know especially if when buying online. What do you mean by arch the hood to fit the fenders? Sounds intense but I may have to go that route
  4. Dang that a really good explanation. Thank you for the knowledge drop
  5. Thank you guys for the help!!! I’m going to decide if I should go with the classic headliner or order the custom fit one. I already bought it but it was only 40 bucks. i really love to keep everything original. That’s my only con going that route. thank you guys :)
  6. Im in the process of installing a new headliner and have watch some fellow member on YouTube doing the same exact thing. but my questions is, how do I remove the chrome trim without bending them? Is there a good trick to doing it or do I need the proper tool for it? Thank you in advance. P.s. if y’all have any trick to doing the install feel free to share :)
  7. Dang that’s amazing. I know it takes a lot of patience and more than one person to do it. Thank you for the info! You’ve definitely sparked my interest
  8. How much did the material cost you? Definitely want to do this until I can shed 6-7k on a paint job
  9. One dyi I love. Ver clean and nice. Might have to make one myself. Might do a Plexiglass or cardboard template first
  10. 👏🏽 awesome thank you for the video
  11. Is the aluminum or copper one better?
  12. Thank you very much, I will look at those options before having to tear it apart. I just want to make sure I do everything else before pulling the engine out. Thanks again
  13. Here the quick back story Back in 2003 my dad and I bought a used 351C and had it completely rebuilt. I was planning on swapping out the 302 for the 351 in 2004 but I ended up going to college and life got in the way. Fast forward till now.... I took the car to the shop for the swap which included the c6 Tranny. The engine idles perfectly fine and starts right up. but... once you turn it on, it starts blowing blueish smoke on the left exhaust (no H pipe) It takes about 1 minute warming up before it blows smoke. Do y’all think it’s the valve stems? I figure they might have dried up after not running for 18 years. I have videos of it as well
  14. Looking for Mach 1 hood, prefer oem but if also willing to get repo if needed if y’all have any recommendations.. thanks!
  15. Definitely do you measurements but I think 9.5 should be a better option. You will avoid banging the wheel well
  16. If you’re going 10 wide. I’d look for 6 -6.5 backspacing. That 5.5 will be tight
  17. Yes I used a sander with 100 grit to sand off any bubbling or high spots. After I Added 2-4 coats of jb weld. Sanded with 200 then 400. That was it. Fairly easy tbh
×
×
  • Create New...