Jump to content


  • Content Count

  • Joined

  • Last visited

Community Reputation

0 Neutral

About Stewart

  • Rank

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. Yep - down under... And am searching the interweb atm for a complete steering column. The mounts appear to be the same under the dash, but will have to see what the coupling is like to the steering box.. Even if I can get a LHD one locally that would be better. Cheers,
  2. Hi - yes, my thoughts exactly... It appears that the ignition switch has the same switching functions and may well be a ford, but not a mustang as I bought a turn indicator unit and it didn't fit, and also a new set of keys and barrels, and the ignition one doesn't fit either... so buggered if I know. Even the threaded holes to hold the switch itself are nuts welded to the outer steering tube and there is a guide for the push-rod which is a nut welded to the tube on its edge... And now thinking about it the ignition key looks like a GM type... It has a tilt steering column which rea
  3. Hi Kilgon, Thanks, I have the schematic and did make sure that the new switch had the same wiring, wiring colours and switching arrangements. It's the mechanical operation that's opposite. The old switch pulls to go from lock to on to start and the new pushes from off to on to start.... If that makes sense.
  4. Hello everyone. My 1972 convertible has had a start button added as it appears the start contacts in the ignition switch have gone high resistance. And in doing so chopped off the start wire from from the switch in the loom. I bought a new replacement from CJ Pony parts and it plugs in and works - yay!!! So the button and wiring has been removed. The big challenge is that the new switch works in the opposite direction to the old one. Has anyone ever come across this before?? I have a bracket made so I should have a solution. The bigger question is, what is the original sw
  5. Hello everyone and thanks for allowing me to join. I'm new to the Mustang scene, although I do also have a 1965 Falcon hardtop... My mustang is a 1972 convertible running a 460 and C6 transmission. It was restored in the 1990s from what I can find out. I started with a plan to tidy up some of the interior and now have the whole dash out and am finding all kinds of interesting things that need attention. This is a RHD car and some corners appear to have been 'shaved' in the process... I'm am going to convert the 3 centre guages to 52mm VDO units as the factory ones don't work. I
  • Create New...