Jump to content

gpierce

Members
  • Posts

    487
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by gpierce

  1. I have a t-5 and trying to decide which hurst shifter to use. Sent from my iPad using Tapatalk When I did mine I bought 3 diff ones and used the one I liked the best:) Sent from my iPhone using Tapatalk
  2. Mine is a Hurst, but I don't know which model. Sent from my iPhone using Tapatalk
  3. Sorry, I can't find any info on it. I don't remember did it 5 years ago:) Sent from my iPhone using Tapatalk
  4. Here's some measurements from mine in neutral. Sent from my iPhone using Tapatalk
  5. I can't tell well from your picture, but could you please measure the length of your shifter. When it is in neutral what is the horizontal distance from the bottom of the ball to the console? Thank you. Sure, I'll go snap a couple pics. I'm not sure what shifter arm I used, as I bought a couple different ones and picked one that felt the most comfy. Sent from my iPhone using Tapatalk
  6. Yes its the large one. I screwed it to the floor/tunnel then console over that. Sent from my iPhone using Tapatalk
  7. Now you need those little projector things for your doors that show a Mustang logo on the ground as you get in and out:) Sent from my iPhone using Tapatalk
  8. I have a 9" in my 73 and I put Wilwood calipers on it. Sent from my iPhone using Tapatalk
  9. Stock height. Sent from my iPhone using Tapatalk
  10. I have 17x7 on my convertible with 225/50/17. Work great:) Sent from my iPhone using Tapatalk
  11. Looking at doing the Classic Auto Air install myself and was wondering if you gotten yours up and running yet? Do you have any pics of how you got the pulley and brackets together? I have a non-factory A/C car as well. Thanks. Here's one on mine using that bracket. Sent from my iPhone using Tapatalk
  12. In that case, any actuator set will work. As I have done in my 73 you just need to find a mounting place, screw it to the door and extend and attach to the existing actuators. All the generic kits contain rods that can be cut to size with a clamp to attach to existing lock rod. This one would be my choice: https://www.sonicelectronix.com/item_75596_Directed-524T.html Sent from my iPhone using Tapatalk
  13. Pretty much any generic one will work, even the cheapest of the cheap. What do you actually want? Set with switches in the car, or remote keyless entry, or both? Alarm? I went with a two way paging Excalibur alarm, cheap actuator set and no switches in the car so it's only keyless entry but the alarm locks the doors after you start the engine. Sent from my iPhone using Tapatalk
  14. The fact my car was a manual and already converted to a T5 was most definitely a deciding factor for me:):) Sent from my iPhone using Tapatalk
  15. Maybe try to see if Gateway Classic Cars will help. They are a consignment dealer and are experienced with international buyers but probably costly. Sent from my iPhone using Tapatalk
  16. I used factory controls, and they supply an electronic adapter to connect to the factory cables. I'm not near my car right now sorry no pics:( Sent from my iPhone using Tapatalk
  17. I have it too on my 73 and am satisfied. I don't remember having to specifically ask about the bracket to use the factory tensioner though, it was just included in mine from what I remember. I too had a factory air system I replaced, however mine had been converted to a sanden type compressor before I started with Factory Air. I thought they had different order codes for cars with or without factory air. Sent from my iPhone using Tapatalk
  18. FYI those 330 series Robertshaw thermostats are not right for Clevelands. The 333s are the right ones: https://www.flowkoolerwaterpumps.com/store/Thermostats/c22/p629/333-180%20Series%20Substitute/product_info.html Sent from my iPhone using Tapatalk
  19. Cool! Sent from my iPhone using Tapatalk
  20. Finished it. Sent from my iPhone using Tapatalk
  21. I got to know, but let me guess first : the knob is for a manual choke, and the switch is for the reverse lights ? Good guesses. Correct on the choke, but the switch is for a power antenna. I like manual:) Sent from my iPhone using Tapatalk
  22. It sort of fits....... Sent from my iPhone using Tapatalk
×
×
  • Create New...