Search the Community
Showing results for tags 'For Sale'.
-
Hi I have a ram air air cleaner orignal ford. The base,lid,and snorkel. The base does have rust on bottom. No holes. I have many more pictures avaiable if interested. PM me. Item in CT. Thanks -
I am selling the A/C system that I removed from my car. It includes: Ducts behind the dash, except defroster duct. Also, not including the registers. Evaporator box with blower motor and vacuum actuators. The evaporator should be flushed since it is likely to have debris. All the actuators are in working condition. Expansion valve and hoses. These should be flushed. Also, they were cut to fit a Sanden compressor, not York. Water heater valve. Center console A/C controls w/ wire harness. Vacuum lines. York compressor, not working, for parts only. Inc -
Looking like I am going to end up with a ROUGH 72’ green on green sportsroof. It took a hard hit on the front drivers side, then while being stored a storm blew over a tree onto it crushing the roof. If you plan on passing by far Northern California get in touch. Interior is in horrific condition as it has been open to the elements for over two decades. Some glass and other bits are good. Anything sportsroof specific I’d be happy to sell or donate- as my car is a coupe. Once I get it home and cleaned out a bit I‘ll post pics and prices. Prices will be low, but I really don -
Parting out a whole car. Let me know what you need. Car is in rough shape but lots of good parts. Has a complete power window setup. Would like to sell that as a whole package glass and all.. car has no mirrors. Thanks Please email me at ruskiem44@gmail.com with all inquiries. My messages fill up too fast on here. Thanks -
I used these for about 4 years. Last year I added speakers to the doors and a subwoofer so I don't need these anymore. They fit in the dash factory location by drilling two extra holes on the grill that are not seen once the dashpad is placed over. They are definitely an improvement over the factory dash speakers. The bass is nothing special compared to door speakers or subwoofer, but if you want to keep the OEM look these are definitely an improvement. They are in great condition. Asking $30 + shipping From Retrosound's page: https://www.retromanufacturing.com/collections/dash-
-
I have a nice map light for sale asking 125 shipped please send a pm for more info and pics. Thanks
-
Pulled from my 1971 Mach 1 w/full console. The two slides need restoration (or some JB Weld), but can be installed as is and the ash tray lid will slide smoothly. Price is $45 + shipping from 94506. Thanks for looking, Nick -
This center gauge cluster was working when we pulled it from our 1971 Mach 1 about a year ago. I have no reason to believe that it's not still working (stored in cabinet in a dry garage). Includes the harness and bulbs. The price is $150 + shipping from 94506. Thanks for looking, Nick
-
Want to find this little guy a good home before it gets any garage-rash. It has been epoxy primer and painted satin black. Price is $35 + shipping from 94506. Thanks for looking, Nick
-
Returning car to stock. Looking to find this intake a good home. Shipping calculated from 94506.
-
This was never installed, but has a little garage-rash (you can see it in the pictures). Hoping to find it a good home. Price: $20 + shipping from 94506.
-
Map light $200 plus shipping
-
73 white bumper and maybe some brackets if still useful. Also have a new 1971-72 front windshield for hardtop or convertible. Shoot me a price at 9124012067 located at savannah ga -
This is a cast aluminum York compressor ET210L built in 2000. It came with my car but it broke due to high RPM use so it should be considered for part or as a core. Includes clutch, pulley and valve connector. The clutch is in working condition. $50 + shipping
-
These are the quarter windows bracket from my Mach 1. I replaced them with a roll down bracket. This is in great shape with some surface rust. $40 (OBO) + shipping
-
This is the distribution valve that came with my car. It was recently rebuilt with the Musclecar Research Kit. The proportional valve spring has been removed since I was using an external adjustable proportional valve. The spring and bushings are in the separate bag. One stud is broken so it would need to be welded. I used it like this with no problem though. $15 + shipping
-
SOLD SOLD WILL TRY TO FIND MORE. I got a couple of the Left Hand trunk springs that are needed on a coupe, Grande or convertible when you add the rear spoiler. They are standard on Cougar but never were on coupe, Grande or vert mustang from factory since the did not get spoiler. So if you have a spoiler and need the extra spring I have two of them for sale, price is $60.00 each plus shipping. I am located in western North Carolina. Not difficult to add I have some pics I need to upload on how to put the spring back in safely and not loose a hand. PM to get in touch. -
I bought this off eBay a couple weeks ago to use it for mock up. Gauges seem to be in very good cosmetic shape, no oxidation on the face. I went a different route for my gauges and it’s time to sell this. It was listed as working, but I have no way to prove that. Notice the one cracked mounting ear, comes with new lenses shown - not installed. $130 plus shipping (probably a medium USPS flat rate box). Message me if interested. Thanks - Peter
-
I am interested in a black, two spoke, padded, steering wheel. Complete and in good condition.This is for a 71 Mach 1 ty -
Two 1972 Sprint hubcaps, good used condition $65 CAD / $50USD plus shipping. Blue painted outline still in very good condition, some small indentations, and scratches. One cap has some scuffing in small areas on the face but only visible within 18 inches. Message me for offers, more photos, and / or shipping quote. Regards, OPN PONY -
Set of four 73 hubcaps in good condition. There are a couple of spots where the black paint is wearing thin. They’re dirty, but I spent 10 minutes with a toothbrush, rag, and Simple Green on one of them and it cleaned up nice (bottom right). See photos. $50 Seattle area pick up only. Thanks for looking.
-
Seemed like there was some interest in these so I figured I’d put some up for sale. They start out life as 2.5” OD .035” wall 6061 T6 aluminum tube. I’m offering the uncut “blanks” for you to finish how you wish. They are 1 3/32” deep, 2 1/2” in diameter and the hole for the gauge is 2 3/32” in diameter. They are not finished, but have been scrubbed with scotchbrite. Note they all have 3 marred spots from where the jaws of the chuck. You can see this in the photo with the steel ruler (look next to the ruler). The spots can be sanded out if you wish. Flip them around however
-
I have recently made a purchase that came with tons of nos parts and some aftermarket For 71-73 Mach 1 and some other models. There are too much to list currently but I am going through and making an inventory. I live in Alaska so will all be smaller items to ship. I’ll give a few examples below but please message me or email me trevyndays@hotmail.com im really hoping to help out fellow 7173 lovers and enthusiasts. I have some rare parts that would really help give the final touches on your concourse restorations.
-
Set of four American Racing 14 x 7 coke bottle wheels with tires that look to have 90 to 95% tread. These are great wheels and tires. I only took them off of my car to replace them with a different style. $250 In North Seattle pick up only. Thanks for looking. -
I had this for 40 yrs and its time to find it a new home. Ford fuel system tester which also tests IVR. A friend used is a couple years ago tot test his 72 Mach sending unit and fuel gauge. $20 plus shipping. Pkg wgt is 11oz, 9"x4.5"x5". I'll need complete address to calculate shipping cost from zip 14224. Contact me thru forum PM or at Fd73ragtop@aol.com
-
Google Custom Site Search
Our Logo
