OIL BURNING

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tommy

Well-known member
Joined
May 21, 2013
Messages
54
Reaction score
0
Location
australia
My Car
1973 mach 1 Q code 4 speed
Hey Guys

Ok so the 73 Q code 4 speed has done 86,000 miles( original), 2 owners and she's burning oil and blowing nice blue smoke! It runs like a dream, idles perfect,has plenty of power and hasn't done alot of miles in the last ten or so years. But when out for my sunday drives and cruising along at 55 -60 mph take your foot off the throttle and then out comes some good clouds of blue smoke not constant but in puffs. anyway its only done about 150 miles since I got her and the oil level is real low on the dip stick when it was right up on arrival when I checked all the levels. Like I said it runs so sweet but the oil burning has me a bit worried. Any idea's . Rings or valve stem seals ?

Thanks

Tommy:huh:

 
Thanks guys

so whats the best method to replace them?

Years ago we did a mates fairlane using a compressor

but now reading about using rope or just going TDC

Just glad i thought to ask about this before I pulled the damn motor out

and went for a rings and bearings job as its been a while since I played lol

I ll definitly check in before i unlock the tool box

thanks again

Fat Dave (tommy)

 
Back
Top