Jump to content

part id help


revsitup
 Share

Recommended Posts

792890216_photo(2).JPG.c7cb4554554b55dcff2dc6bfdc195151.JPGHey guys , Trying to finish up a 73 Mach1 that has been in pieces for many years. Can someone tell me what this piece is for? I will attach a picture.. wasn't sure if it was for the console to cover the shifter boot or something else?

Thanks for any help

Link to comment
Share on other sites

It floats around. Put on after boot is mounted to floor. Slip it over the shifter and down to the second fold from the floor, it should be off the floor about 5/8-3/4". Then put the console over it. The console will touch the plate. The plate slides around under the console as you shift.

Link to comment
Share on other sites

It floats around. Put on after boot is mounted to floor. Slip it over the shifter and down to the second fold from the floor, it should be off the floor about 5/8-3/4". Then put the console over it. The console will touch the plate. The plate slides around under the console as you shift.

 

Thanks! Got it installed and the console tonite. One more piece of the puzzle!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...