Question for you human Dynos: How much horsepower?

Hey guys,

I was thinking about my Cleveland build and its mods today, and i came to this question:

How much horsepower do you think it makes? I don't have a dyno in my back pocket so i'm left with estimates.

What do you think?(AT THE CRANK)

351 2v heads open chamber

Comp roller rockers

Comp Cam **ADV DURATION.=262 INTAKE, 275 EXH.** DUR. @ .050=218/224**110 SEPARATION**LIFT=.513/.519***

Edelbrock performer intake(dual plane)

Carter AFB 4bbl carb

Balanced crank and flywheel

bored .30

Aluminum pistons(i think)

Dual coil springs (ones a damper)

Long tube headers with Dual Flowmaster Exhaust

Pertronix unit

THANKS GEARHEADS

Wheel horsepower or flywheel horsepower?

At the crank.

do you know the CR?

do you know the CR?

Click to expand...

Sorry, im still learning. CR? I probably know.

Compression ratio

Thanks, the compression is almost 9:1(like 8.85ish) the rings are still seating

The calc. came back 370 at 5735 rpm at the crank w/o any accessories ( alternator, water pump, power steering,) at sea level, 75*f yada yada perfect world so I would say 290- 340 depending on how well it is tuned

The calc. came back 370 at 5735 rpm at the crank w/o any accessories ( alternator, water pump, power steering,) at sea level, 75*f yada yada perfect world so I would say 290- 340 depending on how well it is tuned

Click to expand...

Awesome, thanks!