ygolohcysp
Member
- Joined
- Feb 3, 2013
- Messages
- 21
- Reaction score
- 0
- Location
- Allentown, PA
- My Car
- 73 Mach 1 Q-code
Minimal progress on restoration
Hello,
So I'm getting around to making a transmission support for a T-56 six speed mated up to a 351 Cleveland. It's been many years since I took everything apart. I'd appreciate it if someone with a 351C could take a measurement of the space between the engine block and the firewall. I'm fairly certain I know what I need to have the engine sitting right, and the correct angle on the transmission/driveshaft, but I'd just like to confirm that if possible.
Thank you in advance!
Dan
So I'm getting around to making a transmission support for a T-56 six speed mated up to a 351 Cleveland. It's been many years since I took everything apart. I'd appreciate it if someone with a 351C could take a measurement of the space between the engine block and the firewall. I'm fairly certain I know what I need to have the engine sitting right, and the correct angle on the transmission/driveshaft, but I'd just like to confirm that if possible.
Thank you in advance!
Dan