License plate

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jan 19, 2012
Messages
1,296
Reaction score
22
Location
Illinois
My Car
1971 Fastback
2017 Fastback
I was putting my plates on today but the holes are further apart than my actual plates. Is there something missing?

Thanks

5u3atuve.jpg


 
The plate screws into square nylon adapters that you install into the two square holes at the bottom. Any auto store will have the nylon adapters.

-Kurt

 
It appears I have the same/similar license plate mounting bracket on the rear of my 71 Mach 1. When I purchased the car, the license plate was mounted onto the bracket utilizing the two lower holes in the license plate.

I would like to add a nice license plate frame. However, the majority of the frames I have seen have only two holes located at the top of the frame.

Is there an adaptor, or a different mount, that needs to be installed, in order to install a license plate frame that only has the two holes at the top.

 
Back
Top