73 Mach 1 engine out!

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

tommy

Well-known member
Joined
May 21, 2013
Messages
54
Reaction score
0
Location
australia
My Car
1973 mach 1 Q code 4 speed
Hi All simple question do i need to take the bonnet (hood) off to get the engine out?

so finally the new CHI 4v alloy heads arrived and its time to pull the motor out and send to PLR engines here in OZ where the 351c will get a full rebuild with all the good stuff including a solid roller cam but i am asking do I need to take the bonnet (hood) off to get the engine out ? thanks

Fat Dave

 
Take the hood (bonnet) off, it will make life much easier. Sounds like an awseome engine you have planned there.

 
Last edited by a moderator:
Yes as it is too tight with hood on

It is much easier to do with hood off

Mark your bolt locatons with a pencil or drill small holes to insert alinement nails.

 
Do what Don (oms) recommended, I used a 1/8" alignment holes when I took the hood doors and fenders off the car its makes putting it all back together much easier.

 
Last edited by a moderator:
see thats why I love this site thanks guys! Hood off it is I shall give a better detailed engine build report when its all back in in a month or so

thanks again

Dave

 
Back
Top