zaxwax
Active member
Hey guys, when i got my 71 mach 1, the previous owner had done a great job with the body and paint and all the panels lined up nicely. Recently I've noticed that the hood on the passenger side, the door on the passenger side and the trunk on the passenger side all have slight changes in alignment to them. The hood on the driver side by the windshield tilts up slightly now. (1/4 inch difference) and the passenger side door by the hinges is now not flush the front wheel fender panel (1/4 inch or so). The hood on the passenger side has a slightly wider gap as does the trunk on the same side. I'm wondering what would have caused all these small shifts. It's not really visible at first glance but you can see if you examine it closely. They've all happened in the last couple weeks or so. I'm wondering if I've bent something in the frame. I haven't installed subframe connectors yet, but I have a set waiting to be welded in.
Any thoughts on what might be causing this?
thanks
Any thoughts on what might be causing this?
thanks