- Joined
- Apr 22, 2013
- Messages
- 1,023
- Reaction score
- 8
- Location
- san diego
- My Car
- 1973 mustang convertible(some day)
Need help finding master cylinder brake line reducer
I bought a new master cylinder from NAPA and new break lines a while back. The thread in the maser cylinder is a 3/8-24 thread while the line I have that goes from the proportioning value to master cylinder is 1/2-20 thread. Has anyone ran into this. I can find reducers that go from 1/2 female to 7/16 male but not 1/2 male to 3/8.
I'm also a little concern about the master cylinder being right.
Any help would be appreciated.
thanks
I bought a new master cylinder from NAPA and new break lines a while back. The thread in the maser cylinder is a 3/8-24 thread while the line I have that goes from the proportioning value to master cylinder is 1/2-20 thread. Has anyone ran into this. I can find reducers that go from 1/2 female to 7/16 male but not 1/2 male to 3/8.
I'm also a little concern about the master cylinder being right.
Any help would be appreciated.
thanks