- Joined
- Jul 16, 2010
- Messages
- 2,908
- Reaction score
- 12
- Location
- Memphis, TN
- My Car
- 1969 Mach 1
1973 Mach 1
1973 Grande
1989 LX 5.0L
2003 Mercury Marauder
2015 Lincoln MKT
As some of you may recall, I also have a 1969 (former H-Code {351 2V}) Mach 1 that I am restomodding with a 428CJ and cast iron tailshaft C6. I have already added staggered shocks and a 31 spline rear with 3.91 traction lok.
Today, we installed the Global West Sub-frame Connectors and the question came up as to whether or not we should use undercoating. The car is EXTREMELY clean underneath with ABSOLUTELY no rust issues. I will also be using the ACC MASS carpets which we believe will do a lot to address the outside noise issue.
I have posted a thread up on the '69 Mustang forum soliciting opinions as to thoughts on undercoating and would also like to get y'all's take.
So, what are the opinions?
Thanks!
BT
Today, we installed the Global West Sub-frame Connectors and the question came up as to whether or not we should use undercoating. The car is EXTREMELY clean underneath with ABSOLUTELY no rust issues. I will also be using the ACC MASS carpets which we believe will do a lot to address the outside noise issue.
I have posted a thread up on the '69 Mustang forum soliciting opinions as to thoughts on undercoating and would also like to get y'all's take.
So, what are the opinions?
Thanks!
BT