Jump to content

Various parts I need to move


Recommended Posts

Re-Posting this for those new members. My wife really wants to see the sheet metal go.--- Please PM ME so I can get an email on interested parties.

 

Trying to round up my hardware this weekend I dug up a bunch of stuff that needs to go, Lots of small brackets and hardware plus>

 

Console insert - the actual box under the lid

Console ashtray slider assembly- not the appearance plastic

Blue Fuel vapor canisters with bracket

Black Vacuum reservoir canister

Various original lift hooks and frame tie down hooks

Lots of door hinges

Fastback QP endcaps - Pair

Lots of inner door linkage and hardware

71-72 Front fenders

Emergency brake pedal assemblies, springs. cable unions, cable idler

Sway Bar

Sway bar bushing brackets

Lots of 1/4 panel body bracket with floating nuts for rear window track installation

Rear 1/4 window brackets

Original windshield trim - Fair

Original hood trailing edge bright trim- Fair-Rusty

Original cowl hat for drivers side with surrounding metal

Miscellaneous front clip brake and fuel hose runs - original

Ford Small block flywheel-C5AE-6380-E -Good

Power Steering box-

Various Window stops and lots of door internals

License Brackets

351C- Fan shroud

Lots of original marker lights

 

 

Everything else -Make me an offer.

  • Like 1
Link to comment
Share on other sites

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Could you provide a picture of the door speaker wiring & boots?

 

 

Mac

Trying to round up my hardware this weekend I dug up a bunch of stuff that needs to go, Lots of small brackets and hardware plus>

 

Console insert - the actual box under the lid

Console ashtray slider assembly- not the appearance plastic

Blue Fuel vapor canisters with bracket

Black Vacuum reservoir canister

Various original lift hooks and frame tie down hooks

Lots of door hinges

Fastback QP endcaps - Pair

Lots of inner door linkage and hardware

71 Urethane bumper - needs restored

71-72 Front fenders

Emergency brake pedal assemblies, springs. cable unions, cable idler

Sway Bar

Sway bar bushing brackets

Lots of 1/4 panel body bracket with floating nuts for rear window track installation

Rear 1/4 window brackets

Original windshield trim - Fair

Original hood trailing edge bright trim- Fair-Rusty

Original cowl hat for drivers side with surrounding metal

Miscellaneous front clip brake and fuel hose runs - original

Ford Small block flywheel-C5AE-6380-E -Good

Power Steering box-

Various Window stops and lots of door internals

License Brackets

351C- Fan shroud

Lots of original marker lights

Good door speaker wiring with boot and plugs

Set of 5 14 x7 inch Magnum 500 wheels. "Streetable Chrome, BFG Radial T/A - No center caps --$500

 

Everything else -Make me an offer.

Link to comment
Share on other sites

I think I can...

 

I'm sure I have more boots in another box too. And that reminds me that I have 73 Power Window harnesses, bezels and switches too.

PB150164.thumb.JPG.2efbad96a04fbd62b2249601458f3457.JPG

Link to comment
Share on other sites

I'd like pix of the power window parts please.

 

Uhhhh Like this?

 

Note, this is all the door and 1/4 wiring in very good condition with switches and bezels. It does not include the engine bay feed and relay.

PB150167.thumb.JPG.e3a273b561c26973b330f6479f1443e0.JPG

Link to comment
Share on other sites

Hi, KC

 

Racer X gets first bite i think. If he does not want the power window setups complete, can i buy them from you? What would you be asking for the whole lot?

 

Greg.:)

:whistling: LORD, MR FORD - JERRY REED

Link to comment
Share on other sites

Hi-

Any pics of the urethane bumper and a price?

 

I do have some pictures I will attach. The price is $20 plus shipping.

 

Condition-needs some work. The bumper is straight in that it has not been accident damaged, The urethane is in what I would call fair but repairable condition. The main problem with this piece is the corrosion on the underlying steel that has cause some delamination of the urethane. My suggestion would be to remove the urethane coating from the steel, stabilize the rust, then re-bond the urethane to the steel core. If you are familiar with these bumpers, you know the coating on the inside is thin, so that may be possible. I have hesitated to throw this unit out as I feel it can be repaired with some work, but then I am NOT a bodyman,

 

Now that I have my disclaimer out there, here are some shots of the bumper.

P4050003.thumb.JPG.80f859901c6ad1c7646ae8a8bf6335ea.JPG

P4050004.thumb.JPG.59c6a7e737e0aa60ab473c5112060d27.JPG

P4050005.thumb.JPG.61a83352f347731e4b9c361672253fdf.JPG

P4050006.thumb.JPG.6ead9f4bc52d2e6ce52a62e468831d0a.JPG

P4050007.thumb.JPG.a4c6ba9c3ecd3f8000ef9aa8dde10411.JPG

P4050008.thumb.JPG.2bac14594648b9f1c7f91f9dde266d21.JPG

P4050009.thumb.JPG.d66fae3215b8c8185a5329fc1e7d4e04.JPG

P4050010.thumb.JPG.c7f67f66d4d230496b802f7d5827742d.JPG

P4050011.thumb.JPG.0fe76eec395f091336378059bfb8c241.JPG

P4050012.thumb.JPG.19d20c49077abf4be0296dcd26826581.JPG

Link to comment
Share on other sites

Hey-

Thanks for the pics. I'm game, how about a shipping price to 63143? FedEx might be pretty cheap as there is a hub around the corner from us.

Tony

Link to comment
Share on other sites

Looks like you have wiring/speaker for one door and maybe part of another. In any case, what are your asking for what you have?

 

Mac

I think I can...

 

I'm sure I have more boots in another box too. And that reminds me that I have 73 Power Window harnesses, bezels and switches too.

Link to comment
Share on other sites

I hadn't really noticed the variation. I assumed that the wires were different colors for left and right side. The lengths, wire retainers and connectors are identical. I plan to keep the speaker itself. $40 for the pair plus shipping.

kcmash

Looks like you have wiring/speaker for one door and maybe part of another. In any case, what are your asking for what you have?

 

Mac

I think I can...

 

I'm sure I have more boots in another box too. And that reminds me that I have 73 Power Window harnesses, bezels and switches too.

Link to comment
Share on other sites

O.K. give me a total. How do you want paid, will a U.S. Postal money order work?

 

Mac[/b]

[quote=kcmash;223664]

I hadn't really noticed the variation. I assumed that the wires were different colors for left and right side. The lengths, wire retainers and connectors are identical. I plan to keep the speaker itself. $40 for the pair plus shipping.

kcmash

Looks like you have wiring/speaker for one door and maybe part of another. In any case, what are your asking for what you have?

 

Mac

I think I can...

 

I'm sure I have more boots in another box too. And that reminds me that I have 73 Power Window harnesses, bezels and switches too.

Link to comment
Share on other sites

Interested in the u shaped mounting brackets for front sway bar but, your pm is full.

 

I just cleared the PM box out, thanks for the notice. I believe I sent you an email last night with a price. Correct me if I am wrong. I thought I had a spare pair around, but I only found 1 tonight. If I can't find the other spare I can sell you these off my original 71.

PB180175.thumb.JPG.879c771c8155fb3d685afe509005d771.JPG

PB180174.thumb.JPG.4884f854e9994c558b028eca79c3fd1f.JPG

Link to comment
Share on other sites

I've got a trucker buddy that might be able to get the wheels picked up. Can you send me some pictures of them?

 

I don't have an email to send them to.

Here are the 4 best ones. Let me know.

 

kcmash


Are the tie down brackets the long ones for dual exhaust? Do you have the 351 engine lift brackets? Pics and price if you please.

Thanks,

David

 

I cannot locate that friggin box right now. I will let you know when I run across them again. You have first dibs.

 

This is why I need to sell. Everything is packed away so tightly I can't remember which box things are in! Ugggggh!

PB190176.thumb.JPG.93990fd4608b77d85e76d78be060ca73.JPG

PB190177.thumb.JPG.881568504f812a95694f00b279fbdeca.JPG

PB190178.thumb.JPG.278ee77ea5858a31c3e1c3abb4120d1d.JPG

PB190179.thumb.JPG.79f94011167d1de821d858aeac0ae2ce.JPG

Link to comment
Share on other sites

I've got a trucker buddy that might be able to get the wheels picked up. Can you send me some pictures of them?

 

I don't have an email to send them to.

Here are the 4 best ones. Let me know.

 

kcmash


Are the tie down brackets the long ones for dual exhaust? Do you have the 351 engine lift brackets? Pics and price if you please.

Thanks,

David

 

I cannot locate that friggin box right now. I will let you know when I run across them again. You have first dibs.

 

This is why I need to sell. Everything is packed away so tightly I can't remember which box things are in! Ugggggh!

Thanks for the pictures. I should know more about the trucker later today. I'll let you know. My email is rdkng_94@hotmail.com

Link to comment
Share on other sites

Urethane Bumper - Sold

73 Power window Wiring and Switches - Sold

Door Speaker Wiring with Boots - Sold

Magnum 500 Wheels -Pending

 

Windshield trim - 2 Sets of 2 piece Bright Trim still available.

 

Other Items - Still available

Link to comment
Share on other sites

Trying to round up my hardware this weekend I dug up a bunch of stuff that needs to go, Lots of small brackets and hardware plus>

 

Console insert - the actual box under the lid

Console ashtray slider assembly- not the appearance plastic

Blue Fuel vapor canisters with bracket

Black Vacuum reservoir canister

Various original lift hooks and frame tie down hooks

Lots of door hinges

Fastback QP endcaps - Pair

Lots of inner door linkage and hardware

71 Urethane bumper - needs restored

71-72 Front fenders

Emergency brake pedal assemblies, springs. cable unions, cable idler

Sway Bar

Sway bar bushing brackets

Lots of 1/4 panel body bracket with floating nuts for rear window track installation

Rear 1/4 window brackets

Original windshield trim - Fair

Original hood trailing edge bright trim- Fair-Rusty

Original cowl hat for drivers side with surrounding metal

Miscellaneous front clip brake and fuel hose runs - original

Ford Small block flywheel-C5AE-6380-E -Good

Power Steering box-

Various Window stops and lots of door internals

License Brackets

351C- Fan shroud

Lots of original marker lights

Good door speaker wiring with boot and plugs

Set of 5 14 x7 inch Magnum 500 wheels. "Streetable Chrome, BFG Radial T/A - No center caps --$500

 

Everything else -Make me an offer.

 

Hi

 

I'm looking for the following items... perhaps you may have?

 

Left front fender splash shied

radiator shield and or clips

left side (long) cowl grill in great shape?

 

Thanks

Doug in Indy

Link to comment
Share on other sites

Trying to round up my hardware this weekend I dug up a bunch of stuff that needs to go, Lots of small brackets and hardware plus>

 

Console insert - the actual box under the lid

Console ashtray slider assembly- not the appearance plastic

Blue Fuel vapor canisters with bracket

Black Vacuum reservoir canister

Various original lift hooks and frame tie down hooks

Lots of door hinges

Fastback QP endcaps - Pair

Lots of inner door linkage and hardware

71 Urethane bumper - needs restored

71-72 Front fenders

Emergency brake pedal assemblies, springs. cable unions, cable idler

Sway Bar

Sway bar bushing brackets

Lots of 1/4 panel body bracket with floating nuts for rear window track installation

Rear 1/4 window brackets

Original windshield trim - Fair

Original hood trailing edge bright trim- Fair-Rusty

Original cowl hat for drivers side with surrounding metal

Miscellaneous front clip brake and fuel hose runs - original

Ford Small block flywheel-C5AE-6380-E -Good

Power Steering box-

Various Window stops and lots of door internals

License Brackets

351C- Fan shroud

Lots of original marker lights

Good door speaker wiring with boot and plugs

Set of 5 14 x7 inch Magnum 500 wheels. "Streetable Chrome, BFG Radial T/A - No center caps --$500

 

Everything else -Make me an offer.

 

Hi

 

I'm looking for the following items... perhaps you may have?

 

Left front fender splash shied

radiator shield and or clips

left side (long) cowl grill in great shape?

 

Thanks

Doug in Indy

 

I do have splash shields. Do you need just the front shield on the drivers side, or both?

 

Radiator Shield - Do you mean the rubber/plastic strip that fits between the radiator support and the radiator on the top side. 4-5 metal clips hold it to the radiator top? --I'll see if I have a spare

 

Don't think I have the cowl cover, but I'll look.

Link to comment
Share on other sites

Trying to round up my hardware this weekend I dug up a bunch of stuff that needs to go, Lots of small brackets and hardware plus>

 

Console insert - the actual box under the lid

Console ashtray slider assembly- not the appearance plastic

Blue Fuel vapor canisters with bracket

Black Vacuum reservoir canister

Various original lift hooks and frame tie down hooks

Lots of door hinges

Fastback QP endcaps - Pair

Lots of inner door linkage and hardware

71 Urethane bumper - needs restored

71-72 Front fenders

Emergency brake pedal assemblies, springs. cable unions, cable idler

Sway Bar

Sway bar bushing brackets

Lots of 1/4 panel body bracket with floating nuts for rear window track installation

Rear 1/4 window brackets

Original windshield trim - Fair

Original hood trailing edge bright trim- Fair-Rusty

Original cowl hat for drivers side with surrounding metal

Miscellaneous front clip brake and fuel hose runs - original

Ford Small block flywheel-C5AE-6380-E -Good

Power Steering box-

Various Window stops and lots of door internals

License Brackets

351C- Fan shroud

Lots of original marker lights

Good door speaker wiring with boot and plugs

Set of 5 14 x7 inch Magnum 500 wheels. "Streetable Chrome, BFG Radial T/A - No center caps --$500

 

Everything else -Make me an offer.

 

Hi

 

I'm looking for the following items... perhaps you may have?

 

Left front fender splash shied

radiator shield and or clips

left side (long) cowl grill in great shape?

 

Thanks

Doug in Indy

 

I do have splash shields. Do you need just the front shield on the drivers side, or both?

 

Radiator Shield - Do you mean the rubber/plastic strip that fits between the radiator support and the radiator on the top side. 4-5 metal clips hold it to the radiator top? --I'll see if I have a spare

 

Don't think I have the cowl cover, but I'll look.

 

Thanks for checking... yes, on the fender splash shield, I need the driver side front (the shorter of the two) and yes the Radiator Shield as you described with the metal clips... thanks for looking!

 

Looking forward to hearing back.. much appreciated. Doug in Indy


Is the fender splash shield from a 71-72? I'm really not sure if a 73 would be different? Tnx

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...