Jump to content

Various parts I need to move


Recommended Posts

 

Hi

 

I'm looking for the following items... perhaps you may have?

 

Left front fender splash shied

radiator shield and or clips

left side (long) cowl grill in great shape?

 

Thanks

Doug in Indy

 

I do have splash shields. Do you need just the front shield on the drivers side, or both?

 

Radiator Shield - Do you mean the rubber/plastic strip that fits between the radiator support and the radiator on the top side. 4-5 metal clips hold it to the radiator top? --I'll see if I have a spare

 

Don't think I have the cowl cover, but I'll look.

 

Thanks for checking... yes, on the fender splash shield, I need the driver side front (the shorter of the two) and yes the Radiator Shield as you described with the metal clips... thanks for looking!

 

Looking forward to hearing back.. much appreciated. Doug in Indy


Is the fender splash shield from a 71-72? I'm really not sure if a 73 would be different? Tnx

 

I found 2 of the splash shields. One with a piece broken out, and the second is complete. $30 plus shipping for the complete one $20 plus shipping for the other. I don't think there is a difference in the 71, 72 and 73 shields as this part of the fender did not change.

 

I could not find a spare radiator splash cover tonight, or the long cowl cover. I can't even be sure I have them.

 

kcmash

 

Wow! looks like this guy has a better deal. I would go for this http://www.ebay.com/itm/1971-Mustang-Left-Side-Mud-Splash-Shields-OEM-71-72-73-/111488170672?hash=item19f5367ab0

PB260193.thumb.JPG.6e85caed44a600b41d92652a13bff0a6.JPG

PB260194.thumb.JPG.6fe474c039fc85047e530bcb7ab486d3.JPG

Link to comment
Share on other sites

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Wow! looks like this guy has a better deal. I would go for this http://www.ebay.com/itm/1971-Mustang-Left-Side-Mud-Splash-Shields-OEM-71-72-73-/111488170672?hash=item19f5367ab0

 

That would be me. I have a ton of stuff

Link to comment
Share on other sites

  • 3 months later...

Trying to round up my hardware this weekend I dug up a bunch of stuff that needs to go, Lots of small brackets and hardware plus>

 

Console insert - the actual box under the lid

Console ashtray slider assembly- not the appearance plastic

Blue Fuel vapor canisters with bracket

Black Vacuum reservoir canister

Various original lift hooks and frame tie down hooks

Lots of door hinges

Fastback QP endcaps - Pair

Lots of inner door linkage and hardware

71 Urethane bumper - needs restored

71-72 Front fenders

Emergency brake pedal assemblies, springs. cable unions, cable idler

Sway Bar

Sway bar bushing brackets

Lots of 1/4 panel body bracket with floating nuts for rear window track installation

Rear 1/4 window brackets

Original windshield trim - Fair

Original hood trailing edge bright trim- Fair-Rusty

Original cowl hat for drivers side with surrounding metal

Miscellaneous front clip brake and fuel hose runs - original

Ford Small block flywheel-C5AE-6380-E -Good

Power Steering box-

Various Window stops and lots of door internals

License Brackets

351C- Fan shroud

Lots of original marker lights

Good door speaker wiring with boot and plugs

Set of 5 14 x7 inch Magnum 500 wheels. "Streetable Chrome, BFG Radial T/A - No center caps --$500

 

Everything else -Make me an offer.

 

 

Do you still have a driver's side door hinge? If you do, could I see some pics?

Link to comment
Share on other sites

  • 3 weeks later...

Could I see a picture of the hood trailing trim?

 

Here you go.

DSC_0259.thumb.JPG.955b199d07dbb22cd818787e2a8b3e02.JPG

DSC_0260.thumb.JPG.a413f8bc67e650d282ec4409d337a816.JPG

DSC_0261.thumb.JPG.d409ad4e81559920b6c4f9358befa6b1.JPG

Link to comment
Share on other sites

Trying to round up my hardware this weekend I dug up a bunch of stuff that needs to go, Lots of small brackets and hardware plus>

 

Console insert - the actual box under the lid

Console ashtray slider assembly- not the appearance plastic

Blue Fuel vapor canisters with bracket

Black Vacuum reservoir canister

Various original lift hooks and frame tie down hooks

Lots of door hinges

Fastback QP endcaps - Pair

Lots of inner door linkage and hardware

71 Urethane bumper - needs restored

71-72 Front fenders

Emergency brake pedal assemblies, springs. cable unions, cable idler

Sway Bar

Sway bar bushing brackets

Lots of 1/4 panel body bracket with floating nuts for rear window track installation

Rear 1/4 window brackets

Original windshield trim - Fair

Original hood trailing edge bright trim- Fair-Rusty

Original cowl hat for drivers side with surrounding metal

Miscellaneous front clip brake and fuel hose runs - original

Ford Small block flywheel-C5AE-6380-E -Good

Power Steering box-

Various Window stops and lots of door internals

License Brackets

351C- Fan shroud

Lots of original marker lights

Good door speaker wiring with boot and plugs

Set of 5 14 x7 inch Magnum 500 wheels. "Streetable Chrome, BFG Radial T/A - No center caps --$500

 

Everything else -Make me an offer.

What about some pictures of the (5) 14 x 7 Magnum Wheels> You state you don't have the center caps? Right? What about the chrome lug nuts for each wheel?

 

Thanks,

1972pony

Link to comment
Share on other sites

  • 1 month later...

Bill, sorry about the long delay in response. On the 14 inch Magnums I do not have original lug nuts for them, and you are correct as to the no center caps also. They do have good rubber on them.

 

Trying to round up my hardware this weekend I dug up a bunch of stuff that needs to go, Lots of small brackets and hardware plus>

 

Console insert - the actual box under the lid

Console ashtray slider assembly- not the appearance plastic

Blue Fuel vapor canisters with bracket

Black Vacuum reservoir canister

Various original lift hooks and frame tie down hooks

Lots of door hinges

Fastback QP endcaps - Pair

Lots of inner door linkage and hardware

71 Urethane bumper - needs restored

71-72 Front fenders

Emergency brake pedal assemblies, springs. cable unions, cable idler

Sway Bar

Sway bar bushing brackets

Lots of 1/4 panel body bracket with floating nuts for rear window track installation

Rear 1/4 window brackets

Original windshield trim - Fair

Original hood trailing edge bright trim- Fair-Rusty

Original cowl hat for drivers side with surrounding metal

Miscellaneous front clip brake and fuel hose runs - original

Ford Small block flywheel-C5AE-6380-E -Good

Power Steering box-

Various Window stops and lots of door internals

License Brackets

351C- Fan shroud

Lots of original marker lights

Good door speaker wiring with boot and plugs

Set of 5 14 x7 inch Magnum 500 wheels. "Streetable Chrome, BFG Radial T/A - No center caps --$500

 

Everything else -Make me an offer.

What about some pictures of the (5) 14 x 7 Magnum Wheels> You state you don't have the center caps? Right? What about the chrome lug nuts for each wheel?

 

Thanks,

1972pony

Link to comment
Share on other sites

  • 3 months later...

I wan't to re-post this so I can make room,

 

Ford FE Tri-Power Intake - Very Good Condition- $500 OBO

Console insert - the actual box under the lid

Console ashtray slider assembly- not the appearance plastic

Blue Fuel vapor canisters with bracket

Black Vacuum reservoir canister

Various original lift hooks and frame tie down hooks

Lots of door hinges

Fastback QP endcaps - Pair

Lots of inner door linkage and hardware

71-72 Front fenders

Emergency brake pedal assemblies, springs. cable unions, cable idler

Sway Bar

Lots of 1/4 panel body bracket with floating nuts for rear window track installation

Rear 1/4 window brackets

Original hood trailing edge bright trim- Fair-Rusty

Original cowl hat for drivers side with surrounding metal

Miscellaneous front clip brake and fuel hose runs - original

Ford Small block flywheel-C5AE-6380-E -Good

Power Steering box-

Various Window stops and lots of door internals

License Brackets

351C- Fan shroud

Lots of original marker lights

Set of 5 14 x7 inch Magnum 500 wheels. "Streetable Chrome, BFG Radial T/A - No center caps --$500

 

Everything else -Make me an offer.

Link to comment
Share on other sites

Hi.. What is the code on the P/S box tag?

 

 

I wan't to re-post this so I can make room,

 

Ford FE Tri-Power Intake - Very Good Condition- $500 OBO

Console insert - the actual box under the lid

Console ashtray slider assembly- not the appearance plastic

Blue Fuel vapor canisters with bracket

Black Vacuum reservoir canister

Various original lift hooks and frame tie down hooks

Lots of door hinges

Fastback QP endcaps - Pair

Lots of inner door linkage and hardware

71-72 Front fenders

Emergency brake pedal assemblies, springs. cable unions, cable idler

Sway Bar

Lots of 1/4 panel body bracket with floating nuts for rear window track installation

Rear 1/4 window brackets

Original hood trailing edge bright trim- Fair-Rusty

Original cowl hat for drivers side with surrounding metal

Miscellaneous front clip brake and fuel hose runs - original

Ford Small block flywheel-C5AE-6380-E -Good

Power Steering box-

Various Window stops and lots of door internals

License Brackets

351C- Fan shroud

Lots of original marker lights

Set of 5 14 x7 inch Magnum 500 wheels. "Streetable Chrome, BFG Radial T/A - No center caps --$500

 

Everything else -Make me an offer.

The person who says it cannot be done should not interrupt the person doing it. 

Link to comment
Share on other sites

  • 1 month later...
  • 2 months later...

DO you still have a set of the door speaker wiring boots? I just need the rubber boots.

73 Grande H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

 

- Jason

 

 

082-hot-rod-power-tour-2017-1970-1970s.jpg

 

Link to comment
Share on other sites

DO you still have a set of the door speaker wiring boots? I just need the rubber boots.

 

I think I sold those already. I will try to look for them this weekend.

 

kcmash

Link to comment
Share on other sites

KCMASH... Is the steering box still available and what is the tag number on it? I think you forgot two of us who are asking about it..

Thanks

 

 

 

 

 

 

I wan't to re-post this so I can make room,

 

Ford FE Tri-Power Intake - Very Good Condition- $500 OBO

Console insert - the actual box under the lid

Console ashtray slider assembly- not the appearance plastic

Blue Fuel vapor canisters with bracket

Black Vacuum reservoir canister

Various original lift hooks and frame tie down hooks

Lots of door hinges

Fastback QP endcaps - Pair

Lots of inner door linkage and hardware

71-72 Front fenders

Emergency brake pedal assemblies, springs. cable unions, cable idler

Sway Bar

Lots of 1/4 panel body bracket with floating nuts for rear window track installation

Rear 1/4 window brackets

Original hood trailing edge bright trim- Fair-Rusty

Original cowl hat for drivers side with surrounding metal

Miscellaneous front clip brake and fuel hose runs - original

Ford Small block flywheel-C5AE-6380-E -Good

Power Steering box-

Various Window stops and lots of door internals

License Brackets

351C- Fan shroud

Lots of original marker lights

Set of 5 14 x7 inch Magnum 500 wheels. "Streetable Chrome, BFG Radial T/A - No center caps --$500

 

Everything else -Make me an offer.

The person who says it cannot be done should not interrupt the person doing it. 

Link to comment
Share on other sites

KCMASH... Is the steering box still available and what is the tag number on it? I think you forgot two of us who are asking about it..

Thanks

 

 

 

 

 

 

I wan't to re-post this so I can make room,

 

Ford FE Tri-Power Intake - Very Good Condition- $500 OBO

Console insert - the actual box under the lid

Console ashtray slider assembly- not the appearance plastic

Blue Fuel vapor canisters with bracket

Black Vacuum reservoir canister

Various original lift hooks and frame tie down hooks

Lots of door hinges

Fastback QP endcaps - Pair

Lots of inner door linkage and hardware

71-72 Front fenders

Emergency brake pedal assemblies, springs. cable unions, cable idler

Sway Bar

Lots of 1/4 panel body bracket with floating nuts for rear window track installation

Rear 1/4 window brackets

Original hood trailing edge bright trim- Fair-Rusty

Original cowl hat for drivers side with surrounding metal

Miscellaneous front clip brake and fuel hose runs - original

Ford Small block flywheel-C5AE-6380-E -Good

Power Steering box-

Various Window stops and lots of door internals

License Brackets

351C- Fan shroud

Lots of original marker lights

Set of 5 14 x7 inch Magnum 500 wheels. "Streetable Chrome, BFG Radial T/A - No center caps --$500

 

Everything else -Make me an offer.

 

Sorry about the delayed response on this. I missed the response way back in November and have been too swamped to pull that thing and check it. I will try to take a look at it and see what the tag says.

 

Thanks!

Link to comment
Share on other sites

  • 3 months later...

Trying to round up my hardware this weekend I dug up a bunch of stuff that needs to go, Lots of small brackets and hardware plus>

 

Console insert - the actual box under the lid

Console ashtray slider assembly- not the appearance plastic

Blue Fuel vapor canisters with bracket

Black Vacuum reservoir canister

Various original lift hooks and frame tie down hooks

Lots of door hinges

Fastback QP endcaps - Pair

Lots of inner door linkage and hardware

71 Urethane bumper - needs restored

71-72 Front fenders

Emergency brake pedal assemblies, springs. cable unions, cable idler

Sway Bar

Sway bar bushing brackets

Lots of 1/4 panel body bracket with floating nuts for rear window track installation

Rear 1/4 window brackets

Original windshield trim - Fair

Original hood trailing edge bright trim- Fair-Rusty

Original cowl hat for drivers side with surrounding metal

Miscellaneous front clip brake and fuel hose runs - original

Ford Small block flywheel-C5AE-6380-E -Good

Power Steering box-

Various Window stops and lots of door internals

License Brackets

351C- Fan shroud

Lots of original marker lights

Good door speaker wiring with boot and plugs

Set of 5 14 x7 inch Magnum 500 wheels. "Streetable Chrome, BFG Radial T/A - No center caps --$500

 

Everything else -Make me an offer.

Do you still have the steering box? Where are you located

Link to comment
Share on other sites

  • 1 year later...

Sorry,

 

The Steering box is not available.  (I know, what a timely response!)

 

I am off the next few days and would love to move some parts if anyone needs them!  Located in the Kansas City area.

 

Email me if interested today!

 

kcmash

Link to comment
Share on other sites

Do you have a clean pair of the rear tiedown plates?  Also do you still have the fuel vapor and vacuum cans.

 

Yes I do.  I can only find 1 rear tie down, but it is in fine shape.

 

How about $85 plus shipping.  If that does not sound fair, make me an offer.  I have dug them out and and want them to move.

 

20171227_111635.jpg

 

20171227_113540.jpg

Link to comment
Share on other sites

Sounds reasonable - how would you like to be paid?

 

Sent a PM.

Link to comment
Share on other sites

Sounds reasonable - how would you like to be paid?

 

Sent a PM.

 

Mike,  I need to re-negotiate.  I was packaging the parts and found that the fuel vapor canister has a big old dent in the side.  I missed that in the dark garage yesterday.  So I can either cover the shipping or knock $20 off the price to try and be fair.  Let me know if you even want the think now.  

 

Making this a public post so people can see I try to be honest.  

 

 

20171228_145158.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.

×
×
  • Create New...