- Joined
- Mar 21, 2011
- Messages
- 196
- Reaction score
- 1
- Location
- Kunkletown PA
- My Car
- 1972 Mustang convertible. 351C 4V
1968 Ford F-100 300 str6 3 sp
1999 Ford Contour sport V6 5sp
2000 Ford F350 4X4 7.3 turbo diesel dually
2000 Ford F150 4X4 5.7L
I started a thread like this before, but I need to start again in this one for verts.
So here I go, need to replace my inner rocker supports so I made a jig to hold the car and keep it from moving when I start the work. Scott and others have been a Big help but I did not have the jig made at that time, yes as you will see I went overboard making the jig but that's me.. it is two 4"X6"X13' I beams welded together 27" off the floor and leveled. This is my Datum line. When I get the car leveled I will attache it to the jig at 4 points on the frame and extensions for the rockers. I was sent a underbody dimensions sheet but nothing seems to work out. I was told to put 3X at 6.5" and 2X at 6.0" ( as you will see in the pic) when I do this the front end is 2" too high. when I level it to the top edge of the rockers it looks real good but do not know where the nose and tale should really be. there is my problem. I have some pic's to show the car at 6.5" and 6.0" I will next level to the rockers and post more pics.
Scott and all I am ready for your help please.
So here I go, need to replace my inner rocker supports so I made a jig to hold the car and keep it from moving when I start the work. Scott and others have been a Big help but I did not have the jig made at that time, yes as you will see I went overboard making the jig but that's me.. it is two 4"X6"X13' I beams welded together 27" off the floor and leveled. This is my Datum line. When I get the car leveled I will attache it to the jig at 4 points on the frame and extensions for the rockers. I was sent a underbody dimensions sheet but nothing seems to work out. I was told to put 3X at 6.5" and 2X at 6.0" ( as you will see in the pic) when I do this the front end is 2" too high. when I level it to the top edge of the rockers it looks real good but do not know where the nose and tale should really be. there is my problem. I have some pic's to show the car at 6.5" and 6.0" I will next level to the rockers and post more pics.
Scott and all I am ready for your help please.