Front Fender Moldings

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Goose

Member
Joined
Mar 9, 2015
Messages
9
Reaction score
0
Location
S.F. Bay Area, CA
My Car
1971 Mustang Coupe
2001 Mustang Bullitt
2000 BMW Z3 M Coupe
1974 Porsche 914
Anybody know how to remove the front fender moldings?

I know there are (what seems like) two nuts on the lower part, but the upper part is what has me stumped.

Or I could very well be wrong!

Thanks

 
I believe there are three fasteners per side and not fun to access. My memory isn't what it used to be so hopefully someone else will chime in.

Chuck

 
Look in between the molding and the head light. There are two plastic covers about the size of a business card. Remove them then you can access the nuts through the square holes.

 
Thank you all for the replies. On my car, to get access to the screw that holds the black plate in place, I have to take the whole front fascia/grille off (Grill w/out sport lights). Lot more to do than I was hoping, but i guess it will be a nice little project.

Thanks for the help, I definitely wouldn't have found that third screw on my own!

 
Back
Top