end of rear rocker panel pictures

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

83slimer

Well-known member
Joined
Apr 9, 2015
Messages
177
Reaction score
0
Location
Nova scotia Canada
My Car
1973 sportsroof mustang
Anyone have some good pics of what the rear of the rocker panel looks like ? I have repaired mine and fabricate it all by hand , I put a new quarter panel on and dont have enough of the rocker left to see what it is supposed to look like? Pics of the inside where the wheel well and rocker meet. Any help would be appreciated. This picture shows the new quarter and the lip of the outer wheel well , thats the area i need to create the end lip if that makes any sense?endmissing.jpg

 
100_3053.jpg

a Bit any from rear and bottom up? or From inside out,

Thanks
Hi,

Here's a few pictures of my rebuilt rocker panel ends. The ends around the trim holes had lots of rust pin holes in them. I fabricated new ones and welded them in.

Michael

100_3052.jpg

100_3054.jpg

100_3055.jpg

100_3056.jpg

100_3058.jpg

100_3034.jpg

100_3018.jpg

100_3022.jpg

 
Last edited by a moderator:
Perfect just what i was looking for , I fabricate all my own parts I replace so now I see the angles and contour lines, thanks for the detailed pictures.!!!

 
Back
Top