Jump to content

New forum member


72 H-code
 Share

Recommended Posts

Hello all!

 

Thank you for allowing me to join the forum!

I'm working on a 1972 Mach 1 H-code with my brother and father.

 

Marco

 

WP_20150502_18_45_48_Pro.thumb.jpg.33c736b6dc3b2214b1e4f124432b4e85.jpg

Marco

 

"When the world is running down you make the best of what's still around."- Sting and The Police

 

 

 

 

Indy-Auto-2019-Rpm-Autopassion-32.jpg

 

1972 Ford Mustang Mach 1 (Father & sons restoration project)

 

- 351 Cleveland H-code w/ factory Ram-air induction

 

 - FMX 3-speed trans

 

 - 9-inch rear with 3.25:1 ratio

Link to comment
Share on other sites

Welcome from TriCities WA.

-john

(jbojo)

351C 4V cc heads, 10.5 : 1 CR, 290 Herbert cam, Flat top forged pistons, forged connecting rods, Atomic efi,

C6 with Gear Vendor overdrive, 3.89 Tru Trac, Hooker Super Comp with 2 1/2" Pypes Exhaust.        

 

Some Mod pictures can be seen at: [button=http://www.7173mustangs.com/forum-garage?filterxt_uid=2026]Bojo's Garage[/button]

 

 

Link to comment
Share on other sites

Welcome from Virginia! Sounds like a great family project!

Mike AKA Ole Pony & Rare Pony
Our current Mustang garage/driveway
1973 Mustang Convert - Bought in 1974 - Still have it!
2004 Mach 1 Oxford White Auto, Bought Sept 06

20180127_082009.jpg

 

 

 

 

 

Link to comment
Share on other sites

Welcome from the Mt. Rushmore state. I am new here myself. You couldn't have found a better site or group to join up with.

If you ain't afraid (even a little) then you ain't going fast enough!

Link to comment
Share on other sites

Welcome from North Carolina. Great that you are getting to work with your dad and brother on the project. Better than any video game out there.

David

When a man is in the woods and talks and no women are there is he still wrong??:P

David

Link to comment
Share on other sites

"allowing you to join"? Ha! We welcome every member. I look forward to seeing your project progress.

'Mike'

73 Convertible - 351C/4V CC heads/4bolt/forged flat tops/comp 270/rhodes/mallory unilite/tri-power/hookers/glasspacks/c6/3.50 limited slip/Gear Vendors/Global West sub frames, strut rods and shelby style traction bars/ Rear sway bar/tilt steering (not original)

 

Pics of modifications included in: [button=http://www.7173mustangs.com/thread-1973-convertible--3335]My Garage[/button]

 

Link to comment
Share on other sites

Same here, "allowing you to join"! Thanks to you for finding us and sharing your 72 Mach 1 with all of us "Big" Mustang lovers. Really great that your Mach 1 is a "Family" project.

Hello from Mississippi and welcome aboard!!

Steve

 

No Officer...I really don't know how fast I was going, my speedometer stopped at 140!

Link to comment
Share on other sites

Welcome from Iowa.

73 Grande H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

 

- Jason

 

 

082-hot-rod-power-tour-2017-1970-1970s.jpg

 

Link to comment
Share on other sites

Welcome from Oklahoma.

 

Ray

1971 Boss 351  

1972 Q code 4 speed convertible 

1971 Mustang Sportsroof  351-2V FMX 

1971 Hardtop (parts car)

1973 Mach 1 (parts car)

Link to comment
Share on other sites

Hello all!

 

Thank you for allowing me to join the forum!

I'm working on a 1972 Mach 1 H-code with my brother and father.

 

Marco

 

 

 

Hi Marco and a warm welcome from Detroit.

 

I worked on an off road buggy project with my son and the times we shared in the garage together were just so valuable for us both.

 

Good luck - this is a great forum!.

Nigel B

 

1972 Mach 1 Cobra Jet 4 speed

 

 

Link to comment
Share on other sites

I put all three of my sons through Mustang projects and everyone and everything--including the Mustangs--actually survived. Welcome from Florida where vintage cars can be daily drivers.

Tim: Restoring 71-73 Ponies, Restoring People

139A1893.jpg

 

 

Link to comment
Share on other sites

Welcome from W. Tennessee from another H-Coder. Good start on the project and glad to hear it is a family one. White is a great color. Besides the H Code what other features/options are on the car? Here is a motor shot for reference on the H.

 

280888971_19726.thumb.jpg.f7875aea122c1b04d286ae63b0e43abe.jpg

BKDunha

72 Mach 1 H-Code (Concourse driven restoration)

67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)

Link to comment
Share on other sites

Thank you all for the welcomes,

 

We did a lot of work during the summer, heres a quick rundown,

 

we hooked up our professionally rebuilt 351c H-code mild setup,( cam/intake/carb/headers)

with a rebuilt FMX trans

to a rebuilt/serviced 9inch differential, kept it open has stock 3.25 gears

 

Now we are at starting it up but having issues like many people out there...

 

will post photo soon..

Marco

Marco

 

"When the world is running down you make the best of what's still around."- Sting and The Police

 

 

 

 

Indy-Auto-2019-Rpm-Autopassion-32.jpg

 

1972 Ford Mustang Mach 1 (Father & sons restoration project)

 

- 351 Cleveland H-code w/ factory Ram-air induction

 

 - FMX 3-speed trans

 

 - 9-inch rear with 3.25:1 ratio

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...