Can someone post pics or a diagram of correct vacuum hose routing from engine block to hood. I need to know how to route hose to first actuator (right) and then to the second (left). How many of the p-clips are used to secure hose to the underside of hood.
vacuum hose routing on Ram Air
- Thread starter toms1973
- Start date
Help Support 7173Mustangs.com:
- Joined
- Aug 14, 2014
- Messages
- 4,310
- Reaction score
- 1,355
- Location
- Madison, WI
- My Car
- 1971 Mach 1 w/408C stroker
I was just in the garage so here you go... my ram air was added afterwards so it may not be factory exact. Good luck.
1971 M-code Mach 1
1971 M-code Mach 1
- Joined
- Feb 1, 2013
- Messages
- 3,760
- Reaction score
- 43
- Location
- Richland, WA
- My Car
- 1973 Mustang Mach 1 Q code C6 tranny
I always thought it ran on the passenger side of the hood. If only matters if you are doing Concours Judging shows.
- Joined
- Aug 14, 2014
- Messages
- 4,310
- Reaction score
- 1,355
- Location
- Madison, WI
- My Car
- 1971 Mach 1 w/408C stroker
It may and it actually would make sense because it comes out the right side of the manifold. Would be easy to switch sides.
Edit: sorry, i meant right side of manifold.
1971 M-code Mach 1
Edit: sorry, i meant right side of manifold.
1971 M-code Mach 1
Last edited by a moderator:
- Joined
- Apr 19, 2011
- Messages
- 1,455
- Reaction score
- 79
- Location
- Buffalo, NY
- My Car
- 1969 Convertible Restomod enhanced.
former owner (25 yrs) of 1973 Convertible, 351c, A/C, RA
Vacuum hose routing as shown in pics should be the same, except (as noted) it should be on the passenger side.
- Joined
- Sep 30, 2010
- Messages
- 6,166
- Reaction score
- 1,131
- Location
- Mustang, OK.
- My Car
- 1972 Mach 1 Q code
2007 GT
1969 Cougar Eliminator B302
CSX 7000 Shelby Cobra FIA
2020 Edge ST
2002 F250 V10
This may help. http://www.mustangbarn.com/images/vacs/71%20351C%204v%20Ram%20Air%20with%20dvcv.gif
Chuck
Chuck
trainey
Well-known member
- Joined
- Apr 3, 2011
- Messages
- 425
- Reaction score
- 0
- Location
- Kennesaw, GA
- My Car
- 1972 H-code Mach1
2010 GT Premium
2004 F150- The "home depot" machine
2018 HD RoadGlide Ultra
Here is a Mustang Monthly Article on the subject...
http://www.mustangandfords.com/how-to/engine/mump-0907-how-to-install-ram-air-1973-mustang/
http://www.mustangandfords.com/how-to/engine/mump-0907-how-to-install-ram-air-1973-mustang/
- Joined
- Apr 19, 2011
- Messages
- 1,455
- Reaction score
- 79
- Location
- Buffalo, NY
- My Car
- 1969 Convertible Restomod enhanced.
former owner (25 yrs) of 1973 Convertible, 351c, A/C, RA
Bender351
Member
- Joined
- Dec 3, 2012
- Messages
- 19
- Reaction score
- 1
- Location
- Austin, TX
- My Car
- 1971 Mustang Mach 1
351-4V Ram Air 4-Speed
3.25 Standard Rear
Light Pewter Metallic, AC
Orig. Magnum 500s, Tilt Wheel
Here's how I've got mine laid out. Only difference between mine and the diagram posted by c9zx is that the hose is going directly into the vacuum tree behind the air cleaner as opposed to T-ing into the other hose between the tree and the air cleaner vacuum sensor.
Last edited by a moderator:
Similar threads
Latest posts
-
Wanted to tell you all About Mustang Fact Sheets at OD magazine
- Latest: 68cobraJetnotch
-
-
-
-
-
-
Parts For Sale 1973 Mustang Tilt Steering Column, Re conditioned, $800.- Latest: 72MustangSprint
