- Joined
- Sep 12, 2015
- Messages
- 7,643
- Reaction score
- 2,765
- Location
- SW Ontario
- My Car
- 1971 Mustang Mach 1, M code, 4 speed.
Moving on to my next project while my motor is out, I am converting from front manual disc conversion (originally Drums ) to power disc by adding a reman. factory booster. While I'm at it, I want to rebuild my manual trans pedal bracket support with the Scot Drake deluxe roller bearing kit. However, in the NPD catalog, this is only listed for 65-70. Has anybody fitted this kit to a 71??. Just asking because a friend used a 69 pedal set when he converted a 71 from auto to manual trans, so I assuming the pedal supports may be the same, not sure. I also know I will need to relocate the push-rod pin as it is virtually impossible to find a power brake pedal for manual transmissions. I found Mustang Steve's website and he offers a kit as well, but to me, being a former machinist, it didn't look as "professional" Could be the pictures and info didn't do it justice.
The SSBC conversion I used with Kelsey Hays style 4 piston calipers uses a separate rear brake regulator, bypassing the distribution block. Would it be prudent to remove this and go with a new disc/drum distribution block with the power booster?
Comments and suggestion??
The SSBC conversion I used with Kelsey Hays style 4 piston calipers uses a separate rear brake regulator, bypassing the distribution block. Would it be prudent to remove this and go with a new disc/drum distribution block with the power booster?
Comments and suggestion??
Last edited by a moderator: