Jump to content

71-73 Rotisserie


M Beauchamp
 Share

Recommended Posts

Hello guys

 

Now that I am finished with the rotisserie that I built for my 73 Vert Project, I would like to past it on to any member who is near by that wants to do a 71-73 restoration

 

I don't want to ship it, but any one who is close by is welcome to it.

Just pass it on to another member when your project is done

I am in Sarnia Ontario which is right across from Port Huron Michigan

 

Its set up to fit a 71-73

I have also attached my sketches that I used to build it if anyone want to make one up

 

582304483_7173MustangRotisserie.jpg.41ad82cd262dc3d6727026ae4d0da22c.jpg

71-73 Mustang Rotisserie.pdf

  • Like 1
Link to comment
Share on other sites

WOW!! That is awesome! very nice of you. I would be all over that if I was closer!!! Thanks for the prints also! Someone is going to be very happy!!!

Kevin
1971 Mach 1

408C Stroker - C4 w/3,000 stall - 8.8" Rear w/3.73's - Disc brakes all way around.

 

 

Link to comment
Share on other sites

If Garrett ends up not taking it, let me know and I will drive over and pick it up. I have one project 429 Mach on the lift and three more 429s that need extensive body work and the rotisserie would be perfect.

 

 

 

 

Hello guys

 

Now that I am finished with the rotisserie that I built for my 73 Vert Project, I would like to past it on to any member who is near by that wants to do a 71-73 restoration

 

I don't want to ship it, but any one who is close by is welcome to it.

Just pass it on to another member when your project is done

I am in Sarnia Ontario which is right across from Port Huron Michigan

 

Its set up to fit a 71-73

I have also attached my sketches that I used to build it if anyone want to make one up

 

 

 

IMG_3039.jpg.d67ea31907bec6dbd56aa18a234923d2.jpg

Thanks from MotorCity Mustang!

http://stores.ebay.com/MotorCity-Mustang

Link to comment
Share on other sites

Hello Guys

 

Garret is going take the Rotisserie for his 71 vert project

 

I did upload the sketches on the unit (PDF) that anyone could build one with

 

It is set up to bolt on to the rear bumper bolt holes and bolt to the two hole at the bottom of the front frame

 

I should have build this at the start of my project as it would have saved allot of crawling on my back

 

it was nice for doing body work

Link to comment
Share on other sites

Just curious, any special precautions for using the rotisserie on a convert; should the doors remain on to prevent any warping of the body?

Mike AKA Ole Pony & Rare Pony
Our current Mustang garage/driveway
1973 Mustang Convert - Bought in 1974 - Still have it!
2004 Mach 1 Oxford White Auto, Bought Sept 06

20180127_082009.jpg

 

 

 

 

 

Link to comment
Share on other sites

Just curious, any special precautions for using the rotisserie on a convert; should the doors remain on to prevent any warping of the body?

I would definitely use some temp bracing welded in place to help hold the structure in place.

Kevin
1971 Mach 1

408C Stroker - C4 w/3,000 stall - 8.8" Rear w/3.73's - Disc brakes all way around.

 

 

Link to comment
Share on other sites

Just curious, any special precautions for using the rotisserie on a convert; should the doors remain on to prevent any warping of the body?

 

I installed the inner rocker on jack stands before I put it on the rotisserie

I never braced the the door area because i maintained the opening measurements

The car was fine with no door bracing and the door fit great

 

If a guy is going to do rocker replacement on the rotisserie the I would suggest bracing the door openings and use jack stands under while you change that section out

Link to comment
Share on other sites

  • 1 month later...
  • 11 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...