Solenoid - no spark

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

JoColtrane

Active member
Joined
May 9, 2014
Messages
44
Reaction score
2
Location
TX
My Car
71
Ok, so I disconnected the fuse block from the harness and then put it back together and now I have no spark but am not really sure if the two are related. Checked connectors for resistance wire and all seems to be good. Coil is good and solenoid is being energized cause engine turns over but just no spark. Car started fine when I bypassed solenoid. So is it:

1) Resistance wire issue that I'm not catching

2) Bad solenoid

3) Improper assembly of fuse block to harness

4) Something that I'm not considering

Jo

 
Remove the brown or red/green wire (I wire) at the starter solenoid and see if you have 12V at that post when the key is in CRANK. If you do, then the solenoid is good. It could be as easy as a loose connector at the I post.

 
Back
Top