Jump to content

Yet another newbie from CA


Recommended Posts

Hello,

 

I have a 71 fastback driver/project, 351C, 2V, C6, 3.0 diff. Freeze plugs are corroded and the main seal has a small leak. Removing the motor this weekend for a very mild rebuild. Edelbrock 2750, Holley 650, long pipe, Explorer 3.5 rear end, 1800 Stall. Needs paint as it was a desert dweller for the past 30 years, but no rust. I welcome any advice beyond what is already abundantly available here on the site.

Link to post
Share on other sites

Welcome and Greetings from Tucson, Az.

 

I have a desert rescue as well!!!

Thanks

 

Tim

Tucson, Az

1973 SportsRoof

351C bored .040

Crank .020  and Stock cam

Flattop pistons

Edelbrock 4bbl CARB 800 CFM ELEC CHOKE

Edelbrock Performer 2750 Intake Manifold

 

NewPrimedHood_zpsw2jaj0cu.jpg

Link to post
Share on other sites

Welcome from TriCities WA.

-john

(jbojo)

351C 4V cc heads, 10.5 : 1 CR, 290 Herbert cam, Flat top forged pistons, forged connecting rods, Atomic efi,

C6 with Gear Vendor overdrive, 3.89 Tru Trac, Hooker Super Comp with 2 1/2" Pypes Exhaust.        

 

Some Mod pictures can be seen at: [button=http://www.7173mustangs.com/forum-garage?filterxt_uid=2026]Bojo's Garage[/button]

 

 

Link to post
Share on other sites

Hello from Mississippi. The plans you've posted should give you a fun to drive reliable Mustang. Lots of knowledge and experience here, so feel free to "Tap In" anytime you feel the need! Welcome aboard!

Steve

 

No Officer...I really don't know how fast I was going, my speedometer stopped at 140!

Link to post
Share on other sites

Welcome to the site from Virginia! Post up some pictures when you get a chance!

Mike AKA Ole Pony & Rare Pony
Our current Mustang garage/driveway
1973 Mustang Convert - Bought in 1974 - Still have it!
2004 Mach 1 Oxford White Auto, Bought Sept 06

20180127_082009.jpg

 

 

 

 

 

Link to post
Share on other sites

Welcome from Iowa. Post some pics of the car.

73 Grande H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

 

- Jason

 

 

082-hot-rod-power-tour-2017-1970-1970s.jpg

 

Link to post
Share on other sites

Welcome from Denmark northern part of Europe [WINKING FACE] [THUMBS UP SIGN] Regards Lars DK73

 

sent from my 2303. Regards Lars DK73 Denmark

So I'm a proud owner of one Mach 1 73! Regards Lars DK73:whistling:

Link to post
Share on other sites

Welcome from Oklahoma.

 

Ray

1971 Boss 351  

1972 Q code 4 speed convertible 

1971 Mustang Sportsroof  351-2V FMX 

1971 Hardtop (parts car)

1973 Mach 1 (parts car)

Link to post
Share on other sites

howdy from Phoenix. Your plan seems solid. Why the explorer rear end? You probably have a 9" in there now.

'Mike'

73 Convertible - 351C/4V CC heads/4bolt/forged flat tops/comp 270/rhodes/mallory unilite/tri-power/hookers/glasspacks/c6/3.50 limited slip/Gear Vendors/Global West sub frames, strut rods and shelby style traction bars/ Rear sway bar/tilt steering (not original)

 

Pics of modifications included in: [button=http://www.7173mustangs.com/thread-1973-convertible--3335]My Garage[/button]

 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...