Jump to content

1965 Mustang race car


Recommended Posts

Sweet. What no marks out in the street from test hits?????


72 Mach 1 H-Code (Concourse driven restoration)

67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)

Link to comment
Share on other sites

That's awesome.

73 Grande H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.


- Jason





Link to comment
Share on other sites

The tire marks where in the garage, I used the driveway as "shutdown". I didn't have a crew to rely on and it was not a one man car. Add to that, I couldn't stand sitting in staging for over an hour in 95 degree temps. It went to a good home in Abeline Texas about 20 years ago.

Link to comment
Share on other sites

Looked great what was your drive tain? What et and speed?


David, It doesn't sound very impressive by today's standards but, back then in consistently went 9.20 at 148 MPH. It was a 514 (460 based), single 1150 carb, power glide trans., Dana 60 differential. It needed a sheet metal 2 x 4 intake and another carb. It was an all tube chassis car.



Link to comment
Share on other sites

Sweet Thanks for posting!



73 Grande

351C 2v

Now 4v Carb/Cam/headers/T5


Gasoline is for washing parts.

Alcohol is for drinking.

Nitomethane is for racing!



Work in Progress photos here:

Last Update: 4/23/16

























Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Create New...