Jump to content

73 front plate bracket bolts


Recommended Posts

I'll check Monday if nobody answers you by then. I got a new bracket from Don OMS not too long ago so my bolts will come right out. Do you need the length and diameter. Mark

My garage http://www.7173mustangs.com/forum-garage?filterxt_uid=40

 

73 mach 1 351c 4v cc ported, torker2, 750 edelbrock,C6.

73 fastback 351c 2v,performer intake,600 edelbrock,fmx, 325 trac-lok.

Link to comment
Share on other sites

Guest BigPinoyHunk

i had to install new bolts when i put mine in. i believe they are 3/8 fine thread (3/8x24) and you really can put some long bolts into there. i can check as well in the morning.

 

 

Link to comment
Share on other sites

i had to install new bolts when i put mine in. i believe they are 3/8 fine thread (3/8x24) and you really can put some long bolts into there. i can check as well in the morning.

 

 

 

Thanks guys, beats the hell of of guessing and buying different bolts at the hardware store. That way usually assures me at least 2 trips to the store before I find the right ones.;)

Link to comment
Share on other sites

There are 6 bolts that are across the bottom of the bumper. It is held on with the 2 middle bolts. They look like 5/16 - 1 1/8 from the bottom of the washer.

Here's a link for bumper bolts from OMS. I think these are the ones you need or if you have any of the 6 bottom bumper bolts they should be the same. Just match it up.

http://www.ohiomustang.com/store/order_page.asp?itemid=2071

My garage http://www.7173mustangs.com/forum-garage?filterxt_uid=40

 

73 mach 1 351c 4v cc ported, torker2, 750 edelbrock,C6.

73 fastback 351c 2v,performer intake,600 edelbrock,fmx, 325 trac-lok.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...