Carguy4sp
Well-known member
Well I am not very good on the fab side of things and I was hoping someone else had had the same problems and can help a little.
I installed a new Air Gap intake on my 1972 351C and bolted up the throttle cable this morning and it looks like it is 2" to long at idle and 4" too long at WOT.
In the stock location with the stock bracket and stock cable from my old setup 4300.
I looked for an adjustment but I cannot see anyway to adjust that much length out of this cable. I did a search on this site and did not find anything related to a long cable.
I also have a coil mount problem in that the old coil mount location will no longer work due to the humpy large runners, it will not mount in the same location, any ideas?
I installed a new Air Gap intake on my 1972 351C and bolted up the throttle cable this morning and it looks like it is 2" to long at idle and 4" too long at WOT.
In the stock location with the stock bracket and stock cable from my old setup 4300.
I looked for an adjustment but I cannot see anyway to adjust that much length out of this cable. I did a search on this site and did not find anything related to a long cable.
I also have a coil mount problem in that the old coil mount location will no longer work due to the humpy large runners, it will not mount in the same location, any ideas?