Carbs - Chokes

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Aug 21, 2015
Messages
489
Reaction score
2
Location
Tucson
My Car
1973 Mustang Sportsroof. Currently a work in progress!!!
Greetings all.

Edelbrock intake has the bolt holes for the mechanical choke and the new carb is electronic choke.

I hate see those two holes just sitting there. Ideas on how to deal with these.



The posts from the old manifold aren't going to work on the new cab, minus the ERG plate. I should be able to just use bolts or should I order some posts?



Not looking too bad!!!



 
Last edited by a moderator:
Make your own carb studs. Treaded rod or cut off long bolt. Or you can order new studs. They are not expensive unless you go ARP.

Or since you live in AZ (I.E. HOT) you may want to install a spacer.

 
Last edited by a moderator:
Back
Top