power steering pump

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Barrylink

Member
Joined
Apr 5, 2017
Messages
23
Reaction score
2
Location
Morinville Alberta
My Car
1973 mustaNG COUPE with a 351 cleveland 4barrel cobrajet Q code
[url=https://imgbb.com/][img]https://image.ibb.co/m5trfa/IMG_0291.jpg[/img][/url]

[url=https://imgbb.com/]gif free upload[/url]
i need to know the length on the spacer on power steering bracket , I can make one but I need length . Any help is welcome, the spacer is on the end of the bolt in this picture behind the green tape



 
I think you may need to mock it up and measure it. Mine is on a 71 non A/C and the spacer is .56". NPD list this as well, but non A/C listed as 71-73, but we all know what that means!! If you have A/C other suppliers may list it.

 
I think you may need to mock it up and measure it. Mine is on a 71 non A/C and the spacer is .56". NPD list this as well, but non A/C listed as 71-73, but we all know what that means!! If you have A/C other suppliers may list it.
my motor is a 71 non A/C so it should be the same as yours, thanks for the help!

 
I think you may need to mock it up and measure it. Mine is on a 71 non A/C and the spacer is .56". NPD list this as well, but non A/C listed as 71-73, but we all know what that means!! If you have A/C other suppliers may list it.
my motor is a 71 non A/C so it should be the same as yours, thanks for the help!
 You're welcome. At least you have better motor (especially if it's a 4V closed chamber head!)

I did notice that your bracket is different to mine, so it may be a 73 bracket that was used. I'd still mock it up with a stack of washers first to get the size you need with the belts in the correct line.

 
Back
Top