• If you have bought, sold or gained information from our Classifieds, please donate to 7173 Mustangs.com and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Ultra Rare Blue Thunder 429 / 460 COBRA Aluminum T Oil Pan

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

72460CJVert

Active member
Joined
Oct 31, 2016
Messages
26
Reaction score
0
Location
Corpus Christi
My Car
1972 Convertible Restomod
1971 Holman Moody built 460 CJ
C6 Trans
I purchased this Blue Thunder 429 / 460 COBRA Aluminum T Oil Pan new in 2002 from Branda Performance. It sat on my shelf for 14 years and has only been on my motor to mock it up. I decided to go another route with my build and didn’t want to put this rare piece on a race car so I decided to sell it. They stopped making this pan and it is near impossible to find. It will fit any 429 / 460 block and is a beautiful and fully functioning T pan. All baffles work and there is no damage to the pan, only minor scuffing from the mock up and shelf wear and tear.

I can email more pictures on request.

$1,500 OBO Free shipping

Located in Corpus Christi Texas, 78418

20170531_163023.jpg

20170531_163101.jpg

20170531_163107.jpg

20170531_163113.jpg

20170531_163140.jpg

20170531_163224.jpg

20170531_163238.jpg

 
Unfortunately, you can not mount it without grinding it if you have a Ford M-6010-A460 block. It is not enough space because the splayed caps are too wide. I know !

// Thomas

b9 008.JPG

B9 Fästen 001.JPG

 
Unfortunately, you can not mount it without grinding it if you have a Ford M-6010-A460 block. It is not enough space because the splayed caps are too wide. I know !

// Thomas
It fit my D1VE block perfectly..

Nice looking set up you have though.

 
Unfortunately, you can not mount it without grinding it if you have a Ford M-6010-A460 block. It is not enough space because the splayed caps are too wide. I know !

// Thomas
What pump and pickup did you use?

 
There is a Melling hi volume oil pump (not cj / scj) the pick up I do not know the brand. There was a Moroso # 20614 drag race rear sump pan on the engine so I had to change the pick up when i replaced the pan. And the new pick up comes from Jon Kaase I think.

I bought the engine through Joe Sherman racing engines so he bought some gaskets, pick up etc. from Jon Kaase.

// Thomas

 
Back
Top