- Joined
- Apr 22, 2013
- Messages
- 1,023
- Reaction score
- 8
- Location
- san diego
- My Car
- 1973 mustang convertible(some day)
I'm installing my side stripes and i am using a laser to run a straight edge across the car to place a tape line. As I lay out the stripe i see it tappers narrower as it goes back. I cant tell is the top is straight and the bottom is tapper up as it goes back, the other way around, or both the top and bottom tapper towards the middle as it goes back. I figured if the top was straight I would use the laser to place the straight tape line on the top of the decal. Any input would be appreciated.