self made front suspension support tools

I found this on the forum but you have to do a measurement conversion...

https://preview.ibb.co/jEqFWF/Front_Support_tool_Ford.gif

https://www.7173mustangs.com/thread-ford-front-suspension-support-tool-by-tommy-zees?highlight=support+tool

Click to expand...

Hi everyone,

Is here a member making this also for himself, what are the measurements in mm (metric... drawing)?

example of ebay:

http://www.ebay.com/itm/60-73-Mustang-Falcon-Cougar-Fairlane-Torino-Front-Suspension-Support-Tools-/253148641098?hash=item3af0d5b74a:g:70YAAOSwhxBZt0Ud&vxp=mtr

 Thanks

Click to expand...

A section of 2x4 is cheaper.

Sent from my SAMSUNG-SM-G930A using Tapatalk

Click to expand...

A section of 2x4 is cheaper.

Sent from my SAMSUNG-SM-G930A using Tapatalk

Click to expand...

+1  ::thumb::

The only advantage to the original Ford tool is that the angled slot allows it to be placed over the pinch weld and self supporting while raising the car. The $75 tool still requires it to be held in place while lifting the car. If it were self supporting $75 wouldn't seem so high.

Click to expand...