73 351C Alternator Bracket(s) Question

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

MNMustang73

Well-known member
Joined
Aug 25, 2016
Messages
45
Reaction score
3
Location
USA
My Car
1973 Mach 1
I just dropped my engine and transmission back in and I am at the point of trying to put my engine components back on the engine.  I purchased the car partially disassembled and I have identified most of the parts that I have in boxes, buckets and totes however, I am having a hard time identifying the bracket or brackets used to mount the alternator.  My car has a 351C with air.  I do have a bracket marked with the following:  FOMOCO D20E-10156-BA and a curved bracket.  Are these alternator brackets?  Do these work together?  I'm assuming that the curved bracket would be used to adjust tension?

If someone can help me with some info and better yet, some pics it would be awesome.   

Thanks and stand by for a lot more questions as I rebuild this beast!

 
I recently took my engine out and this is what i have. See picture.

The triangular bracket is D0OE101?

The long adjusting one is D0OE10145A

I hope it helps.20171003_220921.jpg

Sent from my SAMSUNG-SM-G930A using Tapatalk

 
I recently took my engine out and this is what i have. See picture.

The triangular bracket is D0OE101?

The long adjusting one is D0OE10145A

I hope it helps.

Sent from my SAMSUNG-SM-G930A using Tapatalk
Perfect.  The picture is exactly what I needed.  

Thanks.

 
Back
Top