Paul of MO
Well-known member
- Joined
- Jul 2, 2011
- Messages
- 635
- Reaction score
- 12
- Location
- Land of old Geezers
- My Car
- 71 M Code Convert - Barn find
73 H Code Convert - Field find
73 H code - Latest Project
I have a nice set of shorter frame perches and clam shell motor mounts for a 1973 Convertible / 351 - these will set the engine about an inch lower to make up for the extra EGR spacer under the carb. I think these are needed to make the Ram Air cleaner base fit up against the hood correctly.
I would like to trade these for:
1971 351c AC Fan Shroud
1971 351c Stock Distributor that I can put a pertronix system in.
Early Valve Covers that say Powered by Ford on the flat area.
351 Cleveland water neck
The shroud I have fits a Torino - have no idea where it came from.
The only distributor I can find is for a 302 - My dad did not do many 302s ??
I found several sets of the later valve covers that only have the Ford Logo and none of them are very clean.
Update 12/12/2017: Also need a crappy set of headers for 351C / 4V - I am going to try to run this engine when I get it done on a test stand.
Let me know if this sounds like a fair trade.
Paul
I would like to trade these for:
1971 351c AC Fan Shroud
1971 351c Stock Distributor that I can put a pertronix system in.
Early Valve Covers that say Powered by Ford on the flat area.
351 Cleveland water neck
The shroud I have fits a Torino - have no idea where it came from.
The only distributor I can find is for a 302 - My dad did not do many 302s ??
I found several sets of the later valve covers that only have the Ford Logo and none of them are very clean.
Update 12/12/2017: Also need a crappy set of headers for 351C / 4V - I am going to try to run this engine when I get it done on a test stand.
Let me know if this sounds like a fair trade.
Paul
Last edited by a moderator: