Which Engine Block Plate is Correct for a 351C? I have three different plates.

7173Mustangs.com

Help Support 7173Mustangs.com:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

4mm

Well-known member
Joined
Aug 26, 2012
Messages
447
Reaction score
3
Location
S. TX
My Car
1971 Mustang 351C 4V Fastback
I’m reinstalling the engine accessories and I have three plates and can’t recall the correct one for a 351C. The engine is a Boss 351 and I wouldn’t know if the plate is different just due to that.

Which one is correct?

IMG_4660.JPG

Sent from my iPhone using Tapatalk

 
Thanks Mark, so the other two are for auto trans? I’ve never had an auto trans.

Yes, date codes are good. [emoji51]

Sent from my iPhone using Tapatalk

 
Last edited by a moderator:
Whichever of the two manual plates you use, make sure the starter location and bolt pattern matches your bellhousing. The small bottom bolts moved around depending on the application.

 
Back
Top