- Joined
- Jul 2, 2010
- Messages
- 6,564
- Reaction score
- 82
- Location
- Warrenton, Virginia 20186
- My Car
- 73 Mustang Conv.
01 Mustang Bullitt (my son owns now)
04 Oxford White Mach 1
04 Azure Blue Mach 1 (sold)
Many years ago when I changed my trans fluid and filter I found a strange looking plastic plunger looking think with a rubber o-ring and a long stem in the trans oil pan. About 5 3/4 inches long. Back in the 70's I could not figure out where it went and just threw it back in the trans oil pan and left it there. So every time I've change the transmission fluid since I've just thrown it back in the pan.
This time I took the time to do some research and was reading through the factory repair manuals and found an entry under the control valve body section and found the following.
"Remove and discard the nylon shipping plug from the oil pan filler tube hole. This plug is used to retain transmission fluid within the transmission during shipment and should be discarded when the oil pan is removed. "
Mystery solved after all these years! Should I through it back in the pan this time for Old Times Sake?
?
This time I took the time to do some research and was reading through the factory repair manuals and found an entry under the control valve body section and found the following.
"Remove and discard the nylon shipping plug from the oil pan filler tube hole. This plug is used to retain transmission fluid within the transmission during shipment and should be discarded when the oil pan is removed. "
Mystery solved after all these years! Should I through it back in the pan this time for Old Times Sake?
?