- Joined
- Jan 17, 2015
- Messages
- 1,774
- Reaction score
- 613
- Location
- California
- My Car
- 71' Grande project.
Long story short I need a new cam and lifters.
Engine is a stroked 351C (377 now) with CHI 2V heads (60-66cc chamber depending on where the numbers come from)
Static compression with .040 head gaskets is just about 11:1 dead on.
Cam that was in it was a Crower 15244
I want a hydraulic flat tappet setup that is similar (if not identical). Going over .550 lift does not really gain me anything with the CHI heads. The engine made 425/425 with the 15244, while it was eating a couple lifters. Some level of vacuum for a brake booster is needed.
https://www.summitracing.com/parts/hrs-238041-09
https://www.summitracing.com/parts/isk-431281
https://www.summitracing.com/parts/edl-7168
https://www.summitracing.com/parts/lun-10320703
Ideas?
Last edited by a moderator: