Jump to content

2 1/2 "Exhaust


Recommended Posts

I used a Magnaflow system on my car and it fits and sounds great. Our car wasn't equipped with staggered rear shocks so this made things easier.

351w - Ford racing GT40X 178 cc aluminum heads - Ford racing(crane) 1.7 roller rockers - Comp Cams 280H magnum cam .544" / .544" lift - ARP hardware - hedman longtubes - magnaflow exhaust with X pipe - Duraspark - MSD digital 6al box - MSD TFI coil - optima red top battery - tuff stuff 140 amp alternator - weiand stealth intake  - edelbrock 1406 600 carb  - march pullies and brackets - Be cool fan controller - derale electric fan - FMX trans - motive 4.11 gears - traction lok - lakewood traction bars.                                            

 

 

 

 

 

 

 

 

 

 

 

Link to comment
Share on other sites

https://www.precisionexhaust.com/

 

 

Thats the preferred supplier for all of us.  

 

kcmash

Link to comment
Share on other sites

I bought a parts car that had a Pypes 2 1/2" exhaust on it that was there 2 weeks and got crashed. Also had ceramic coated headers. Was an H cold engine. The system fit great but I understand that headers and exhaust would be over $1,500. That is what I paid for the whole car.

David

When a man is in the woods and talks and no women are there is he still wrong??:P

David

Link to comment
Share on other sites

https://www.precisionexhaust.com/

 

 

Thats the preferred supplier for all of us.  

 

kcmash

 

+1 

 

Mine fit perfect.

73 Grande H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

 

- Jason

 

 

082-hot-rod-power-tour-2017-1970-1970s.jpg

 

Link to comment
Share on other sites

+1 on going stainless for exhaust. I'd say invest in stainless clamps too.

 

Got 2 1/2 duraluminium exhaust pipes and stainless free flow dempers tailor made with stainless clamps.

I had to remove the exhaust a few times over the years, not only it looks good, all goes off and back in as if it was installed yesterday.

Its more expensive than regular exhaust materials for sure on first install, but much cheaper in the long run if you want to keep the car.

73 modified Grande 351C. (Finally back on the road woohoo!) 

71 429CJ. ( In progress )

Link to comment
Share on other sites

I am looking for a stainless header back exhaust having trouble finding one, anyone know where

 

Pypes has a 2.5" header back system in stainless. You should be good to go as long as you don't have staggered shocks. 

 

http://pypesexhaust.com/i-13475202-71-73-mustang-2-5-crossmember-back-w-x-pipe-system-sfm04.html

 

 

Link to comment
Share on other sites

I am looking for a stainless header back exhaust having trouble finding one, anyone know where

 

I used a Magnaflow system on my car and it fits and sounds great. Our car wasn't equipped with staggered rear shocks  so this made things easier.

 

I cannot find manga flow for mustangs where did you get it

Link to comment
Share on other sites

I am using the 67-70 kit, it fits the car perfect. Part number 15816. I got my exhaust system from CJ pony parts.

351w - Ford racing GT40X 178 cc aluminum heads - Ford racing(crane) 1.7 roller rockers - Comp Cams 280H magnum cam .544" / .544" lift - ARP hardware - hedman longtubes - magnaflow exhaust with X pipe - Duraspark - MSD digital 6al box - MSD TFI coil - optima red top battery - tuff stuff 140 amp alternator - weiand stealth intake  - edelbrock 1406 600 carb  - march pullies and brackets - Be cool fan controller - derale electric fan - FMX trans - motive 4.11 gears - traction lok - lakewood traction bars.                                            

 

 

 

 

 

 

 

 

 

 

 

Link to comment
Share on other sites

I am using the 67-70 kit, it fits the car perfect. Part number 15816. I got my exhaust system from CJ pony parts.

 

Except staggered shocks. Has anyone tried to modify these or the ones from Pypes the fit staggered shocks?

 

 

“If you can't explain it simply, you don't understand it well enough.”

--Albert Einstein

 

Link to comment
Share on other sites

I believe it but when I contacted them and asked them for a stainless steel exhaust they said it's not available. So where do Convertible owners get an exhaust from?

71-73 Mustangs never die, they just go faster!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...