Jump to content

wire wheel brush


Pegleg
 Share

Recommended Posts

I am looking at wire wheel brushes. There seem to be a large selection out there. Can someone tell me whats the best wire wheel to strip the paint from the interior.

There are wire wheels for drills and angle grinders with an array of shapes and sizes. A picture would be appreciated of the right shape to use.

Steve

1971 Grande

 

Link to comment
Share on other sites

https://bouwkern.com/image/cache/catalog/product-11585/Bouwkern12638-1000x1000.jpg

Its not the exact type (buy from a local car shop) and not the size (my bosh machine needs 12,5cm)

 

These twisted wires is what I use for all heavy work, They work better for me, last longer than straight wires and get rid of heavy rust, paint much faster than regular long wires. When they eventually loose their twists, I keep them for less demanding work, like clean bolts, studs heads.

They are over here usually twice the price as a non twisted. Well worth it.

Some swear by long thick nylon wires. Bought and tried a few times. I'm totally not convinced. They are too soft for my needs.

Also, its only when they have been used for a while that you start have some wires flying around, vs straight wire that would tend to loose a wire more often on rough surfaces.

The cons is that they require more force to hold the machine than the regular wire ones and they make quite a lot of noise.

 

Curious to know what @NOT A T5 used to do his interior.

73 modified Grande 351C. (Finally back on the road woohoo!) 

71 429CJ. ( In progress )

Link to comment
Share on other sites

Always wear eye protection when using wire wheels. Grinders work better than drills as they have more power.

http://www.7173mustangs.com/gallery/1_01_07_15_8_53_18.png

 

"I love my Hookers!" and "Get some Strange" probably have a different connotation to non automotive enthusiasts!

Link to comment
Share on other sites

Always wear eye protection when using wire wheels.  Grinders work better than drills as they have more power.

 

Totally! When I said they loose a wire from time to time, I mean, these go mach 1 straight into your skin. You really don't want that in your eye!

I mentioned these make noise, an hearing protection is really a must as you will use it for long period of time. Next to eye protection you need of course mask, thick gloves and non wide clothing as well. Its really a must.

I use drill brushes only for hard to reach places. It would take ages to do an interior or engine compartment using these.

73 modified Grande 351C. (Finally back on the road woohoo!) 

71 429CJ. ( In progress )

Link to comment
Share on other sites

Always wear eye protection when using wire wheels.  Grinders work better than drills as they have more power.

 

Totally! When I said they loose a wire from time to time, I mean, these go mach 1 straight into your skin. You really don't want that in your eye!

I mentioned these make noise, an hearing protection is really a must as you will use it for long period of time. Next to eye protection you need of course mask, thick gloves and non wide clothing as well. Its really a must.

I use drill brushes only for hard to reach places. It would take ages to do an interior or engine compartment using these.

 

Took a week to do engine bay. Though i was lucky as there was zero rust. Of all the pictures of restoration to date this is my favourite picture. I always take a look at it as it was the biggest change to the car

15181698_829065110530332_4296000657142884751_n.jpg

Steve

1971 Grande

 

Link to comment
Share on other sites

Always wear eye protection when using wire wheels.  Grinders work better than drills as they have more power.

 

Totally! When I said they loose a wire from time to time, I mean, these go mach 1 straight into your skin. You really don't want that in your eye!

I mentioned these make noise, an hearing protection is really a must as you will use it for long period of time. Next to eye protection you need of course mask, thick gloves and non wide clothing as well. Its really a must.

I use drill brushes only for hard to reach places. It would take ages to do an interior or engine compartment using these.

 

Took a week to do engine bay. Though i was lucky as there was zero rust. Of all the pictures of restoration to date this is my favourite picture. I always take a look at it as it was the biggest change to the car

15181698_829065110530332_4296000657142884751_n.jpg

Wait, you did this with a brush on a drill?

73 modified Grande 351C. (Finally back on the road woohoo!) 

71 429CJ. ( In progress )

Link to comment
Share on other sites

 

Totally! When I said they loose a wire from time to time, I mean, these go mach 1 straight into your skin. You really don't want that in your eye!

I mentioned these make noise, an hearing protection is really a must as you will use it for long period of time. Next to eye protection you need of course mask, thick gloves and non wide clothing as well. Its really a must.

I use drill brushes only for hard to reach places. It would take ages to do an interior or engine compartment using these.

 

Took a week to do engine bay. Though i was lucky as there was zero rust. Of all the pictures of restoration to date this is my favourite picture. I always take a look at it as it was the biggest change to the car

15181698_829065110530332_4296000657142884751_n.jpg

Wait, you did this with a brush on a drill?

 

 

I had access to a friends garage and he had a compressor attachment. Unfortunately i don't have the same access. I could wait till he has free space but after seeing the post from "NOT A T5" i got the impetus. Seeing that picture and the finish he got i have to get on it. I think it was Telly Savalis released a song entitled "If a picture paints a thousand words". That picture from "NOT A T5" did just that for me :D

Steve

1971 Grande

 

Link to comment
Share on other sites

Please do not take a wire brush lightly. The one and only accident, really there is no such thing as an accident, was with wire brush. I worked in carpentry, in tool & die shop, machine shop, worked on my cars since 14 and never had an accident until a year ago when a wire brush, twisted type, grabbed and ripped my hand wrist and arm. Was bleeding form a probably 10" long cut, gash rip. I was wearing kevlar gloves and eye protection. The brush grabbed and then caught the glove and ripped it off then went up my palm, wrist and up my arm. The trigger on the side grinder was not locked. It happened in less than a blink of an eye.

I still strongly suggest on any interior, in the trunk, under the chassis or under the hood spend a little money and get it blasted.

I have done this for over 55 years and it got me.

The wires fly from the wheel and the wheel can actually explode. One of those wires in your eye and it is gone.

Just how I feel about it.

David

When a man is in the woods and talks and no women are there is he still wrong??:P

David

Link to comment
Share on other sites

Wire wheel paint and rust removal worked great for me, just use a cordless drill with rechargeable batteries their RPM's are lower. Keep reversing your drill to make the wheels more efficient. Also they don't get the metal as hot as a corded drill or a grinder either, stuff's flying everywhere and is more dangerous due to higher RPM's. I'd wear eye protection and double up on latex gloves. Another pic added.

IMG_0586.thumb.JPG.281bc82405d1dc3406ef9fcc75ceed34.JPG

71-73 Mustangs never die, they just go faster!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...